{"id":17703,"date":"2026-09-16T02:28:23","date_gmt":"2026-09-16T01:28:23","guid":{"rendered":"https:\/\/pv-mounts.com\/?p=17703"},"modified":"2026-09-16T03:02:29","modified_gmt":"2026-09-16T02:02:29","slug":"solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins","status":"publish","type":"post","link":"https:\/\/pv-mounts.com\/ar\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/","title":{"rendered":"Solar Hanger Bolt Guide: Hanger Bolts for Steel and Wood Purlins"},"content":{"rendered":"<p class=\"wp-block-paragraph\">A solar hanger bolt is a key fastening component used to connect a rooftop PV mounting system to the underlying roof structure. It provides a structural fixing point through the roof covering and supports an L-foot or mounting plate for attaching the solar rail.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For EPC contractors, solar installers, distributors, and solar mounting hardware buyers, selecting a hanger bolt involves more than choosing an M10 diameter. The <strong>structural fixing thread must match the supporting roof structure<\/strong>, and the bolt length and upper mounting configuration must also match the roof build-up and mounting system.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">PV Mounts supplies <strong>M10 SUS410 solar hanger bolts<\/strong> in <strong>200 mm, 250 mm, and 300 mm lengths<\/strong>, with two structural fixing configurations:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Self-Tapping Screw Thread for Steel Purlins<\/strong><\/li>\n\n\n\n<li><strong>Wood Screw Thread for Wood Purlins<\/strong><\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">The upper mounting assembly can be configured with a <strong>SUS304 flange nut, EPDM pad, AL6005-T5 aluminum L-foot, AL6005-T5 aluminum plate, or SUS304 stainless steel plate<\/strong>, according to the mounting system and project requirements.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">1. What Is a Solar Hanger Bolt?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">A solar hanger bolt is a threaded roof fastener used to create a connection between a rooftop solar mounting system and an underlying structural member such as a steel purlin or wood purlin.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The hanger bolt passes through the roof covering and provides a mounting connection above the roof surface. An EPDM pad is used around the roof penetration, while the upper mounting end connects to an L-foot or mounting plate.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Typical connection path:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Roof covering \u2192 EPDM sealing interface \u2192 Hanger bolt \u2192 Upper mounting component<\/strong> \uff08<strong>L-foot or mounting plate<\/strong>\uff09<strong> \u2192 Flange nut \u2192 Solar rail<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The exact position and arrangement of the flange nut and upper mounting components may vary according to the mounting system design.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A hanger bolt has two important connection functions:<\/p>\n\n\n\n<ol start=\"1\" class=\"wp-block-list\">\n<li><strong>Structural fixing end<\/strong> \u2014 connects to the steel purlin or wood purlin.<\/li>\n\n\n\n<li><strong>Upper mounting end<\/strong> \u2014 connects to the L-foot or mounting plate used to support the solar rail.<\/li>\n<\/ol>\n\n\n\n<p class=\"wp-block-paragraph\">The structural fixing configuration is selected according to the roof structure.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img fetchpriority=\"high\" decoding=\"async\" width=\"1000\" height=\"750\" src=\"https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/02\/Solar-PV-bracket-double-head-hanger-bolt-PVM-HB-5.jpg\" alt=\"Solar Pv Bracket Double Head Hanger Bolt Pvm Hb (5)\" class=\"wp-image-9872\" srcset=\"https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/02\/Solar-PV-bracket-double-head-hanger-bolt-PVM-HB-5.jpg 1000w, https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/02\/Solar-PV-bracket-double-head-hanger-bolt-PVM-HB-5-300x225.jpg 300w, https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/02\/Solar-PV-bracket-double-head-hanger-bolt-PVM-HB-5-768x576.jpg 768w, https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/02\/Solar-PV-bracket-double-head-hanger-bolt-PVM-HB-5-16x12.jpg 16w, https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/02\/Solar-PV-bracket-double-head-hanger-bolt-PVM-HB-5-600x450.jpg 600w\" sizes=\"(max-width: 1000px) 100vw, 1000px\" \/><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\">2. Steel Purlin vs. Wood Purlin Hanger Bolts<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The main difference between the two hanger bolt versions is the fixing thread at the structural end.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th>Version<\/th><th>Structural Support<\/th><th>Fixing Thread<\/th><th>\u0627\u0644\u0645\u0648\u0627\u062f<\/th><th>Standard Lengths<\/th><\/tr><tr><td>Steel Purlin Hanger Bolt<\/td><td>Steel purlin<\/td><td>Self-tapping screw thread<\/td><td>SUS410<\/td><td>M10 \u00d7 200 \/ 250 \/ 300 mm<\/td><\/tr><tr><td>Wood Purlin Hanger Bolt<\/td><td>Wood purlin \/ timber rafter<\/td><td>Wood screw thread<\/td><td>SUS410<\/td><td>M10 \u00d7 200 \/ 250 \/ 300 mm<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">Steel Purlin Hanger Bolt<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The steel-purlin version uses a <strong>self-tapping screw thread<\/strong> at the structural fixing end.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It is intended for suitable steel purlin structures used in <a href=\"https:\/\/pv-mounts.com\/ar\/roof-solar-mounting-system-manufacturer\/\">rooftop PV applications<\/a>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The suitability of the fixing thread depends on the actual steel purlin material, thickness, profile, thread engagement, installation method, and project requirements.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Wood Purlin Hanger Bolt<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The wood-purlin version uses a <strong>wood screw thread<\/strong> at the structural fixing end.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It is designed for suitable timber structures such as wood purlins or timber rafters.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The wood screw thread provides mechanical engagement with the timber structural member.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">The Key Selection Rule<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The simplest selection rule is:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Steel purlin \u2192 Self-tapping screw thread<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Wood purlin \u2192 Wood screw thread<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">An M10 diameter alone does not determine whether a hanger bolt is suitable for a particular roof structure.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">3. Quick Selection Guide<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">For EPC procurement teams and installers, the basic selection process can be reduced to three steps.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Step 1: Identify the Structural Support<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Determine whether the hanger bolt will be fixed into:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Steel purlin<\/li>\n\n\n\n<li>Wood purlin \/ timber rafter<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">Step 2: Select the Structural Fixing Thread<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Choose:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Self-tapping screw thread<\/strong> for suitable steel purlins<\/li>\n\n\n\n<li><strong>Wood screw thread<\/strong> for suitable wood purlins<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">Step 3: Select the Length and Upper Mounting Interface<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Choose one of:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>M10 \u00d7 200 mm<\/strong><\/li>\n\n\n\n<li><strong>M10 \u00d7 250 mm<\/strong><\/li>\n\n\n\n<li><strong>M10 \u00d7 300 mm<\/strong><\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Then specify the required upper mounting component:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>AL6005-T5 aluminum L-foot<\/strong><\/li>\n\n\n\n<li><strong>AL6005-T5 aluminum plate<\/strong><\/li>\n\n\n\n<li><strong>SUS304 stainless steel plate<\/strong><\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">This gives buyers a straightforward specification process:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Structural material \u2192 Fixing thread \u2192 Bolt length \u2192 Upper mounting component<\/strong><\/p>\n\n\n\n<h2 class=\"wp-block-heading\">4. M10 SUS410 Solar Hanger Bolt Specifications<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">PV Mounts supplies solar hanger bolts in <strong>M10 SUS410 stainless steel<\/strong>.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Standard Lengths<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>M10 \u00d7 200 mm<\/strong><\/li>\n\n\n\n<li><strong>M10 \u00d7 250 mm<\/strong><\/li>\n\n\n\n<li><strong>M10 \u00d7 300 mm<\/strong><\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">The appropriate length depends on the roof build-up, structural member position, mounting component thickness, and required exposed thread.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">SUS410 Material<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">SUS410 is a martensitic stainless steel commonly selected for applications where hardness and mechanical strength are important.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For solar hanger bolts, SUS410 provides a suitable material option for the threaded fastening component.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Material selection should be evaluated according to the project environment, structural requirements, installation conditions, and applicable standards.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">5. Self-Tapping Screw Thread for Steel Purlins<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">\u0625\u0646 <strong>M10 SUS410 Solar Hanger Bolt for Steel Purlins<\/strong> uses a <strong>self-tapping screw thread<\/strong> at the structural fixing end.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The purpose of this thread is to provide mechanical engagement with a suitable steel purlin during installation.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The steel-purlin version may be used in<a href=\"https:\/\/pv-mounts.com\/ar\/roof-solar-mounting-system-manufacturer\/\"> rooftop PV systems<\/a> where the solar mounting structure is connected to suitable steel-supported roof structures.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">However, the fastener should not be selected based only on the fact that the roof contains steel.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Before procurement, buyers should confirm:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Steel purlin material<\/li>\n\n\n\n<li>Purlin thickness<\/li>\n\n\n\n<li>Purlin profile<\/li>\n\n\n\n<li>Required fixing depth<\/li>\n\n\n\n<li>Installation method<\/li>\n\n\n\n<li>Structural design requirements<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">This ensures that the selected hanger bolt is appropriate for the actual supporting structure.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Steel-Purlin Assembly<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">A complete assembly can include:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>M10 SUS410 hanger bolt<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Self-tapping screw thread<\/strong><\/li>\n\n\n\n<li><strong>SUS304 flange nut<\/strong><\/li>\n\n\n\n<li><strong>EPDM pad<\/strong><\/li>\n\n\n\n<li><strong>AL6005-T5 aluminum L-foot<\/strong><\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">\u0623\u0648<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>AL6005-T5 aluminum plate<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u0623\u0648<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>SUS304 stainless steel plate<\/strong><\/p>\n\n\n\n<h2 class=\"wp-block-heading\">6. Wood Screw Thread for Wood Purlins<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">\u0625\u0646 <strong>M10 SUS410 Solar Hanger Bolt for Wood Purlins<\/strong> uses a <strong>wood screw thread<\/strong> at the structural fixing end.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The wood screw thread is designed to provide mechanical engagement with a suitable timber structural member.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Typical supporting structures include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Wood purlins<\/li>\n\n\n\n<li>Timber rafters<\/li>\n\n\n\n<li>Suitable timber roof structures<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">The fixing location should be positioned in an appropriate structural timber member rather than relying only on the roof covering.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Wood-Purlin Assembly<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">A complete assembly can include:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>M10 SUS410 hanger bolt<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Wood screw thread<\/strong><\/li>\n\n\n\n<li><strong>SUS304 flange nut<\/strong><\/li>\n\n\n\n<li><strong>EPDM pad<\/strong><\/li>\n\n\n\n<li><strong>AL6005-T5 aluminum L-foot<\/strong><\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">\u0623\u0648<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>AL6005-T5 aluminum plate<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u0623\u0648<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>SUS304 stainless steel plate<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The upper mounting configuration can therefore remain flexible while the structural fixing thread is selected according to the roof structure.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">7. The Two Connection Functions of a Solar Hanger Bolt<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Understanding the two connection areas is important when specifying a hanger bolt.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th>Connection Area<\/th><th>\u0627\u0644\u0648\u0638\u064a\u0641\u0629<\/th><th>Configuration<\/th><\/tr><tr><td>Structural fixing end<\/td><td>Connects the hanger bolt to the roof structure<\/td><td>Self-tapping screw thread or wood screw thread<\/td><\/tr><tr><td>Upper mounting end<\/td><td>Connects the hanger bolt to the solar mounting system<\/td><td>Aluminum L-foot, aluminum plate, or SUS304 plate<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">Structural Fixing End<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The lower fixing end determines which roof structure the hanger bolt is designed for.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Steel purlin \u2192 Self-tapping screw thread<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Wood purlin \u2192 Wood screw thread<\/strong><\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Upper Mounting End<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The upper connection interfaces with the solar mounting hardware.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Available configurations include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>AL6005-T5 aluminum L-foot<\/strong><\/li>\n\n\n\n<li><strong>AL6005-T5 aluminum plate<\/strong><\/li>\n\n\n\n<li><strong>SUS304 stainless steel plate<\/strong><\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">This means the structural fixing configuration and the upper mounting interface can be specified independently according to the project requirements.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">8. EPDM Pad and Roof Sealing<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">An EPDM pad is commonly used with solar hanger bolts at the roof penetration area.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Its functions include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Providing a sealing interface<\/li>\n\n\n\n<li>Helping reduce the risk of water ingress<\/li>\n\n\n\n<li>Accommodating minor surface irregularities<\/li>\n\n\n\n<li>Creating an interface between the hanger bolt assembly and roof surface<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Correct installation is important for the overall roof sealing arrangement.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The EPDM pad should be correctly positioned and compressed according to the mounting system design and installation requirements.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The sealing arrangement should be considered together with the roof covering, fastener position, installation method, and overall roof waterproofing design.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" width=\"980\" height=\"735\" src=\"https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/02\/Solar-PV-bracket-hanger-bolt-PVM-HB-17.jpg\" alt=\"Solar Pv Bracket Hanger Bolt Pvm Hb (17)\" class=\"wp-image-9869\" srcset=\"https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/02\/Solar-PV-bracket-hanger-bolt-PVM-HB-17.jpg 980w, https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/02\/Solar-PV-bracket-hanger-bolt-PVM-HB-17-300x225.jpg 300w, https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/02\/Solar-PV-bracket-hanger-bolt-PVM-HB-17-768x576.jpg 768w, https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/02\/Solar-PV-bracket-hanger-bolt-PVM-HB-17-16x12.jpg 16w, https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/02\/Solar-PV-bracket-hanger-bolt-PVM-HB-17-600x450.jpg 600w\" sizes=\"(max-width: 980px) 100vw, 980px\" \/><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\">9. Aluminum L-Foot, Aluminum Plate, or SUS304 Plate?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The upper mounting component can be selected according to the solar rail connection and project requirements.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><a href=\"https:\/\/pv-mounts.com\/ar\/%d8%a7%d9%84%d9%85%d9%86%d8%aa%d8%ac\/%d8%ad%d8%a7%d9%85%d9%84-%d9%82%d8%af%d9%85-%d8%b4%d9%85%d8%b3%d9%8a-l-%d9%82%d8%af%d9%85-%d8%b4%d9%85%d8%b3%d9%8a\/l-foot-with-hanger-bolt-for-solar-roof-mounting-pvm-l-02\/\">AL6005-T5 Aluminum L-Foot<\/a><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">An aluminum L-foot provides a common connection between the hanger bolt and solar mounting rail.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">AL6005-T5 aluminum offers a lightweight mounting component suitable for many aluminum rail systems.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">AL6005-T5 Aluminum Plate<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">An aluminum mounting plate can be used when a plate-style connection is preferred.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The plate can be configured according to the hanger bolt assembly and solar rail connection requirements.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><a href=\"https:\/\/pv-mounts.com\/ar\/%d8%a7%d9%84%d9%85%d9%86%d8%aa%d8%ac\/%d8%ad%d8%a7%d9%85%d9%84-%d9%82%d8%af%d9%85-%d8%b4%d9%85%d8%b3%d9%8a-l-%d9%82%d8%af%d9%85-%d8%b4%d9%85%d8%b3%d9%8a\/adapter-plate-with-hanger-bolt-for-solar-roof-mounting-pvm-l-03\/\">SUS304 Stainless Steel Plate<\/a><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">A SUS304 stainless steel plate can be selected when the project requires a stainless-steel mounting interface.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Therefore, the mounting plate is <strong>not limited to stainless steel<\/strong>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The upper mounting options include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>AL6005-T5 aluminum L-foot<\/strong><\/li>\n\n\n\n<li><strong>AL6005-T5 aluminum plate<\/strong><\/li>\n\n\n\n<li><strong>SUS304 stainless steel plate<\/strong><\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">For EPC projects, the final configuration should be selected according to the rail connection, material requirements, structural design, and installation conditions.<\/p>\n\n\n\n<figure class=\"wp-block-gallery has-nested-images columns-default is-cropped wp-block-gallery-1 is-layout-flex wp-block-gallery-is-layout-flex\">\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" width=\"1000\" height=\"750\" data-id=\"16207\" src=\"https:\/\/pv-mounts.com\/wp-content\/uploads\/2026\/05\/PVM-L-02-L-feet-with-hanger-bolt-M10x200-for-solar-module-installation-33logo.png\" alt=\"PVM-L-02 L feet with hanger bolt M10x200  for solar module installation (33logo)\" class=\"wp-image-16207\" srcset=\"https:\/\/pv-mounts.com\/wp-content\/uploads\/2026\/05\/PVM-L-02-L-feet-with-hanger-bolt-M10x200-for-solar-module-installation-33logo.png 1000w, https:\/\/pv-mounts.com\/wp-content\/uploads\/2026\/05\/PVM-L-02-L-feet-with-hanger-bolt-M10x200-for-solar-module-installation-33logo-300x225.png 300w, https:\/\/pv-mounts.com\/wp-content\/uploads\/2026\/05\/PVM-L-02-L-feet-with-hanger-bolt-M10x200-for-solar-module-installation-33logo-768x576.png 768w, https:\/\/pv-mounts.com\/wp-content\/uploads\/2026\/05\/PVM-L-02-L-feet-with-hanger-bolt-M10x200-for-solar-module-installation-33logo-16x12.png 16w, https:\/\/pv-mounts.com\/wp-content\/uploads\/2026\/05\/PVM-L-02-L-feet-with-hanger-bolt-M10x200-for-solar-module-installation-33logo-600x450.png 600w\" sizes=\"(max-width: 1000px) 100vw, 1000px\" \/><figcaption class=\"wp-element-caption\">PVM-L-02 L feet with hanger bolt M10x200  for solar module installation (33logo)<\/figcaption><\/figure>\n<\/figure>\n\n\n\n<h2 class=\"wp-block-heading\">10. How to Choose M10 \u00d7 200, 250, or 300 mm<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">PV Mounts supplies three standard M10 hanger bolt lengths:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>200 mm<\/strong><\/li>\n\n\n\n<li><strong>250 mm<\/strong><\/li>\n\n\n\n<li><strong>300 mm<\/strong><\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">The correct length depends on the actual roof construction rather than the roof name alone.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Consider:<\/p>\n\n\n\n<ol start=\"1\" class=\"wp-block-list\">\n<li>Roof covering thickness<\/li>\n\n\n\n<li>Distance from the roof surface to the structural member<\/li>\n\n\n\n<li>Required fixing depth<\/li>\n\n\n\n<li>EPDM pad and mounting component thickness<\/li>\n\n\n\n<li>Required exposed thread<\/li>\n\n\n\n<li>L-foot or plate configuration<\/li>\n\n\n\n<li>Solar rail connection requirements<\/li>\n<\/ol>\n\n\n\n<p class=\"wp-block-paragraph\">A longer hanger bolt may be required when the structural member is positioned further below the roof surface.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For project procurement, the supplier should confirm the required length based on the actual roof build-up and mounting assembly.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"1000\" height=\"750\" src=\"https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/02\/PVM-L-03-plate-with-hanger-bolt-production-photo-solar-mounting-bracket-14.jpg\" alt=\"PVM-L-03 plate with hanger bolt production photo solar mounting bracket (14)\" class=\"wp-image-14446\" srcset=\"https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/02\/PVM-L-03-plate-with-hanger-bolt-production-photo-solar-mounting-bracket-14.jpg 1000w, https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/02\/PVM-L-03-plate-with-hanger-bolt-production-photo-solar-mounting-bracket-14-300x225.jpg 300w, https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/02\/PVM-L-03-plate-with-hanger-bolt-production-photo-solar-mounting-bracket-14-768x576.jpg 768w, https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/02\/PVM-L-03-plate-with-hanger-bolt-production-photo-solar-mounting-bracket-14-16x12.jpg 16w, https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/02\/PVM-L-03-plate-with-hanger-bolt-production-photo-solar-mounting-bracket-14-600x450.jpg 600w\" sizes=\"(max-width: 1000px) 100vw, 1000px\" \/><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\">11. How to Specify a Solar Hanger Bolt in an RFQ<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">For EPC procurement, requesting only an <strong>&#8220;M10 solar hanger bolt&#8221;<\/strong> leaves too many specifications undefined.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A complete RFQ description should identify the structural support, fixing thread, length, material, and upper mounting configuration.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Example: Steel Purlin<\/h3>\n\n\n\n<blockquote class=\"wp-block-quote is-layout-flow wp-block-quote-is-layout-flow\">\n<p class=\"wp-block-paragraph\"><strong>Solar Hanger Bolt, M10 \u00d7 250 mm, SUS410, self-tapping screw thread for steel purlin, with SUS304 flange nut, EPDM pad, and AL6005-T5 aluminum L-foot.<\/strong><\/p>\n<\/blockquote>\n\n\n\n<h3 class=\"wp-block-heading\">Example: Wood Purlin<\/h3>\n\n\n\n<blockquote class=\"wp-block-quote is-layout-flow wp-block-quote-is-layout-flow\">\n<p class=\"wp-block-paragraph\"><strong>Solar Hanger Bolt, M10 \u00d7 250 mm, SUS410, wood screw thread for wood purlin, with SUS304 flange nut, EPDM pad, and AL6005-T5 aluminum plate.<\/strong><\/p>\n<\/blockquote>\n\n\n\n<p class=\"wp-block-paragraph\">The length and upper mounting component can be changed according to the project.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This specification format helps EPC procurement teams and suppliers avoid ambiguity and quote the correct hanger bolt assembly.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">12. Solar Hanger Bolt BOM for EPC Procurement<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">For EPC contractors, distributors, and solar installers, hanger bolts are often purchased as part of a complete rooftop mounting hardware package.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Steel Purlin Version<\/h3>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th>Component<\/th><th>Specification<\/th><\/tr><tr><td>Hanger bolt<\/td><td>M10 SUS410<\/td><\/tr><tr><td>Structural fixing thread<\/td><td>Self-tapping screw thread<\/td><\/tr><tr><td>Flange nut<\/td><td>SUS304<\/td><\/tr><tr><td>Sealing pad<\/td><td>EPDM<\/td><\/tr><tr><td>L-foot option<\/td><td>\u0623\u0644\u0648\u0645\u0646\u064a\u0648\u0645 AL6005-T5<\/td><\/tr><tr><td>Plate option<\/td><td>\u0623\u0644\u0648\u0645\u0646\u064a\u0648\u0645 AL6005-T5<\/td><\/tr><tr><td>Stainless plate option<\/td><td>SUS304<\/td><\/tr><tr><td>Standard length<\/td><td>200 \/ 250 \/ 300 mm<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">Wood Purlin Version<\/h3>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th>Component<\/th><th>Specification<\/th><\/tr><tr><td>Hanger bolt<\/td><td>M10 SUS410<\/td><\/tr><tr><td>Structural fixing thread<\/td><td>Wood screw thread<\/td><\/tr><tr><td>Flange nut<\/td><td>SUS304<\/td><\/tr><tr><td>Sealing pad<\/td><td>EPDM<\/td><\/tr><tr><td>L-foot option<\/td><td>\u0623\u0644\u0648\u0645\u0646\u064a\u0648\u0645 AL6005-T5<\/td><\/tr><tr><td>Plate option<\/td><td>\u0623\u0644\u0648\u0645\u0646\u064a\u0648\u0645 AL6005-T5<\/td><\/tr><tr><td>Stainless plate option<\/td><td>SUS304<\/td><\/tr><tr><td>Standard length<\/td><td>200 \/ 250 \/ 300 mm<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The key difference between the two BOMs is the <strong>structural fixing thread<\/strong>.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">13. What Information Should Buyers Provide?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">When requesting a quotation, EPC contractors, distributors, and installers should provide:<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Roof Structure<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Steel purlin<\/li>\n\n\n\n<li>Wood purlin \/ timber rafter<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">Fixing Thread<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Self-tapping screw thread<\/li>\n\n\n\n<li>Wood screw thread<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">Hanger Bolt Length<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>M10 \u00d7 200 mm<\/li>\n\n\n\n<li>M10 \u00d7 250 mm<\/li>\n\n\n\n<li>M10 \u00d7 300 mm<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">Upper Mounting Component<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>AL6005-T5 aluminum L-foot<\/li>\n\n\n\n<li>AL6005-T5 aluminum plate<\/li>\n\n\n\n<li>SUS304 stainless steel plate<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">Roof Covering<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Provide the roof type and, where available, roof covering thickness.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Solar Rail<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">If the hanger bolt is being integrated into an existing mounting system, provide the rail and connection requirements where applicable.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Providing this information allows the supplier to evaluate the complete mounting assembly rather than quote the hanger bolt as an isolated fastener.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">14. Solar Hanger Bolt Installation Considerations<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Before installation, verify:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>The roof structural member has been correctly identified.<\/li>\n\n\n\n<li>The fixing thread matches the structural material.<\/li>\n\n\n\n<li>The fixing position aligns with the structural member.<\/li>\n\n\n\n<li>The hanger bolt length is appropriate for the roof build-up.<\/li>\n\n\n\n<li>The EPDM pad is correctly positioned.<\/li>\n\n\n\n<li>The L-foot or mounting plate is correctly installed.<\/li>\n\n\n\n<li>The flange nut is tightened according to the mounting system requirements.<\/li>\n\n\n\n<li>The roof waterproofing arrangement is maintained.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">For steel purlin applications, the self-tapping screw thread should be checked against the actual purlin specifications.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For wood purlin applications, the wood screw thread should engage an appropriate structural timber member.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The hanger bolt should therefore be selected based on <strong>structural compatibility, dimensions, and mounting requirements<\/strong>, not diameter alone.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">15. <a href=\"https:\/\/pv-mounts.com\/ar\/%d8%a7%d9%84%d9%85%d9%86%d8%aa%d8%ac\/%d8%ad%d8%a7%d9%85%d9%84-%d9%82%d8%af%d9%85-%d8%b4%d9%85%d8%b3%d9%8a-l-%d9%82%d8%af%d9%85-%d8%b4%d9%85%d8%b3%d9%8a\/hanger-bolts-for-solar-roof-mounting-pvm-hb\/\">Solar Hanger Bolt<\/a> for OEM and Custom Supply<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">For solar mounting distributors, EPC contractors, installers, and importers, hanger bolts may be purchased as part of a larger rooftop solar mounting system.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">PV Mounts can configure the hanger bolt assembly according to project requirements, including:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Customized packaging<\/li>\n\n\n\n<li>Private labeling<\/li>\n\n\n\n<li>Project-specific assembly BOM<\/li>\n\n\n\n<li>Mixed solar mounting hardware orders<\/li>\n\n\n\n<li>OEM configuration <\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">For OEM procurement, the structural support and upper mounting interface should be clearly specified on the purchase order.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For example:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Steel purlin + self-tapping screw thread<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u0623\u0648<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Wood purlin + wood screw thread<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This distinction helps prevent different hanger bolt configurations from being mixed during production and installation.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">16. <a href=\"https:\/\/pv-mounts.com\/ar\/\">\u0627\u0644\u062d\u0648\u0627\u0645\u0644 \u0627\u0644\u0643\u0647\u0631\u0648\u0636\u0648\u0626\u064a\u0629<\/a> M10 SUS410 Solar Hanger Bolt<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">PV Mounts supplies <strong>M10 SUS410 solar hanger bolts<\/strong> for steel-purlin and wood-purlin rooftop solar mounting applications.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Standard Specifications<\/h3>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th>Item<\/th><th>Specification<\/th><\/tr><tr><td>Hanger bolt material<\/td><td>SUS410<\/td><\/tr><tr><td>Bolt size<\/td><td>M10<\/td><\/tr><tr><td>Standard lengths<\/td><td>200 \/ 250 \/ 300 mm<\/td><\/tr><tr><td>Steel purlin fixing<\/td><td>Self-tapping screw thread<\/td><\/tr><tr><td>Wood purlin fixing<\/td><td>Wood screw thread<\/td><\/tr><tr><td>Flange nut<\/td><td>SUS304<\/td><\/tr><tr><td>Sealing pad<\/td><td>EPDM<\/td><\/tr><tr><td>L-foot option<\/td><td>\u0623\u0644\u0648\u0645\u0646\u064a\u0648\u0645 AL6005-T5<\/td><\/tr><tr><td>Plate option<\/td><td>\u0623\u0644\u0648\u0645\u0646\u064a\u0648\u0645 AL6005-T5<\/td><\/tr><tr><td>Stainless steel plate option<\/td><td>SUS304<\/td><\/tr><tr><td>\u0627\u0644\u062a\u0637\u0628\u064a\u0642<\/td><td>Rooftop solar mounting<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The two structural fixing configurations allow the hanger bolt assembly to be matched to different roof structures while maintaining a consistent M10 platform.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For EPC projects and distributors, the complete assembly can be specified according to the roof structure, roof build-up, mounting interface, solar rail, and project BOM.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"1000\" height=\"750\" src=\"https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/06\/PVM-L-03-Adapter-Plate-with-solar-hanger-bolt-packing-photo-4.jpg\" alt=\"PVM-L-03 Adapter Plate with solar hanger bolt packing photo (4)\" class=\"wp-image-14136\" srcset=\"https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/06\/PVM-L-03-Adapter-Plate-with-solar-hanger-bolt-packing-photo-4.jpg 1000w, https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/06\/PVM-L-03-Adapter-Plate-with-solar-hanger-bolt-packing-photo-4-300x225.jpg 300w, https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/06\/PVM-L-03-Adapter-Plate-with-solar-hanger-bolt-packing-photo-4-768x576.jpg 768w, https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/06\/PVM-L-03-Adapter-Plate-with-solar-hanger-bolt-packing-photo-4-16x12.jpg 16w, https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/06\/PVM-L-03-Adapter-Plate-with-solar-hanger-bolt-packing-photo-4-600x450.jpg 600w\" sizes=\"(max-width: 1000px) 100vw, 1000px\" \/><\/figure>\n\n\n\n<h1 class=\"wp-block-heading\">17. FAQ<\/h1>\n\n\n\n<div class=\"schema-faq wp-block-yoast-faq-block\"><div class=\"schema-faq-section\" id=\"faq-question-1789521160974\"><strong class=\"schema-faq-question\">Q1: What is a solar hanger bolt?<\/strong> <p class=\"schema-faq-answer\">Solar hanger bolt is a roof mounting fastener used to connect a rooftop solar mounting system to an underlying structural member such as a steel purlin or wood purlin.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1789521211624\"><strong class=\"schema-faq-question\">Q2: What size solar hanger bolts does PV Mounts supply?<\/strong> <p class=\"schema-faq-answer\">PV Mounts supplies <strong>M10 SUS410 solar hanger bolts<\/strong> in standard lengths of <strong>200 mm, 250 mm, and 300 mm<\/strong>.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1789521252317\"><strong class=\"schema-faq-question\">Q3: What is the difference between a self-tapping solar hanger bolt and a wood screw hanger bolt?<\/strong> <p class=\"schema-faq-answer\">The structural fixing thread is different.<br>A <strong>self-tapping screw thread<\/strong> is used for suitable steel purlins, while a <strong>wood screw thread<\/strong> is used for suitable wood purlins or timber rafters.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1789521284123\"><strong class=\"schema-faq-question\">Q4: Can an M10 solar hanger bolt be used for both steel and wood purlins?<\/strong> <p class=\"schema-faq-answer\">Not simply because it is M10. The structural fixing thread must match the supporting material.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1789521357325\"><strong class=\"schema-faq-question\">Q5: What does M10 \u00d7 250 mm mean?<\/strong> <p class=\"schema-faq-answer\">M10 identifies the metric thread size of the hanger bolt, while 250 mm refers to the nominal hanger bolt length.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1789521379222\"><strong class=\"schema-faq-question\">Q6: How do I choose between M10 \u00d7 200, 250, and 300 mm?<\/strong> <p class=\"schema-faq-answer\">The required length depends on the roof covering, distance to the structural member, fixing requirements, mounting component thickness, and required exposed thread.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1789521402864\"><strong class=\"schema-faq-question\">Q7: What material is the hanger bolt made from?<\/strong> <p class=\"schema-faq-answer\">The PV Mounts standard hanger bolt is made from <strong>SUS410 stainless steel<\/strong>.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1789521437090\"><strong class=\"schema-faq-question\">Q8: What is the function of the EPDM pad?<\/strong> <p class=\"schema-faq-answer\">The EPDM pad provides a sealing interface around the roof penetration and helps reduce the risk of water ingress when correctly installed.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1789521463517\"><strong class=\"schema-faq-question\">Q9: Can the hanger bolt use an aluminum L-foot?<\/strong> <p class=\"schema-faq-answer\">Yes. The assembly can be supplied with an <strong>AL6005-T5 aluminum L-foot<\/strong>.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1789521489932\"><strong class=\"schema-faq-question\">Q10: Can the mounting plate be aluminum?<\/strong> <p class=\"schema-faq-answer\">Yes. The mounting plate can be supplied in <strong>\u0623\u0644\u0648\u0645\u0646\u064a\u0648\u0645 AL6005-T5<\/strong>.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1789521511851\"><strong class=\"schema-faq-question\">Q11: Can the mounting plate be SUS304 stainless steel?<\/strong> <p class=\"schema-faq-answer\">Yes. A <strong>SUS304 stainless steel plate<\/strong> is also available as an upper mounting option.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1789521537963\"><strong class=\"schema-faq-question\">Q12: Can the hanger bolt be supplied as a complete assembly?<\/strong> <p class=\"schema-faq-answer\">Yes. The assembly can include the M10 SUS410 hanger bolt, SUS304 flange nut, EPDM pad, and an AL6005-T5 aluminum L-foot, AL6005-T5 aluminum plate, or SUS304 stainless steel plate.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1789521559204\"><strong class=\"schema-faq-question\">Q13: What information should an EPC provide when requesting a quotation?<\/strong> <p class=\"schema-faq-answer\">The buyer should provide the roof structure, fixing thread, required hanger bolt length, roof covering, upper mounting component, and solar rail requirements where applicable.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1789521614340\"><strong class=\"schema-faq-question\">Q14: Can PV Mounts supply OEM solar hanger bolts?<\/strong> <p class=\"schema-faq-answer\">Yes. OEM and project-specific configurations can be discussed based on the roof structure, dimensions, mounting interface, packaging, and project BOM.<\/p> <\/div> <\/div>\n\n\n\n<h1 class=\"wp-block-heading\">\u0627\u0644\u062e\u0627\u062a\u0645\u0629<\/h1>\n\n\n\n<p class=\"wp-block-paragraph\">Selecting a solar hanger bolt starts with identifying the <strong>roof structure and structural fixing thread<\/strong>, not simply the M10 diameter.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For steel-supported roofs, PV Mounts supplies <strong>M10 SUS410 solar hanger bolts with a self-tapping screw thread for suitable steel purlins<\/strong>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For timber-supported roofs, PV Mounts supplies <strong>M10 SUS410 solar hanger bolts with a wood screw thread for suitable wood purlins<\/strong>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Both versions are available in:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>M10 \u00d7 200 mm<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>M10 \u00d7 250 mm<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>M10 \u00d7 300 mm<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The upper mounting assembly can be configured with:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>SUS304 flange nut<\/strong><\/li>\n\n\n\n<li><strong>EPDM pad<\/strong><\/li>\n\n\n\n<li><strong>AL6005-T5 aluminum L-foot<\/strong><\/li>\n\n\n\n<li><strong>AL6005-T5 aluminum plate<\/strong><\/li>\n\n\n\n<li><strong>SUS304 stainless steel plate<\/strong><\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">For EPC contractors, installers, distributors, and <a href=\"https:\/\/pv-mounts.com\/ar\/solar-mounting-hardware-epc-procurement-guide\/\">solar mounting hardware<\/a> buyers, specifying the <strong>structural support, fixing thread, bolt length, and upper mounting interface<\/strong> provides a clear way to procure the correct hanger bolt assembly.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For project BOMs, OEM requirements, or customized rooftop solar mounting hardware, provide the roof structure, required length, mounting interface, and project specifications so the hanger bolt assembly can be configured accordingly.<\/p>","protected":false},"excerpt":{"rendered":"<p>A solar hanger bolt is a key fastening component used to connect a rooftop PV mounting system to the underlying roof structure. It provides a structural fixing point through the roof covering and supports an L-foot or mounting plate for attaching the solar rail. For EPC contractors, solar installers, distributors, and solar mounting hardware buyers, [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":10392,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1,159],"tags":[],"class_list":["post-17703","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-news","category-solar-mounting-accessories"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.4 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Solar Hanger Bolt Guide: Hanger Bolts for Steel and Wood Purlins - PV MOUNTS<\/title>\n<meta name=\"description\" content=\"Solar hanger bolt selection guide for EPCs and installers. M10 SUS410 bolts for steel and wood purlins with 200, 250 and 300 mm lengths, EPDM pads and mounting options.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/pv-mounts.com\/ar\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/\" \/>\n<meta property=\"og:locale\" content=\"ar_AR\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Solar Hanger Bolt Guide: Hanger Bolts for Steel and Wood Purlins - PV MOUNTS\" \/>\n<meta property=\"og:description\" content=\"Solar hanger bolt selection guide for EPCs and installers. M10 SUS410 bolts for steel and wood purlins with 200, 250 and 300 mm lengths, EPDM pads and mounting options.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/pv-mounts.com\/ar\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/\" \/>\n<meta property=\"og:site_name\" content=\"PV MOUNTS\" \/>\n<meta property=\"article:published_time\" content=\"2026-09-16T01:28:23+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-09-16T02:02:29+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/02\/PVM-L-03-Adapter-Plate-with-solar-hanger-bolt-installated-effection-6.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1000\" \/>\n\t<meta property=\"og:image:height\" content=\"750\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Steffan\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"\u0643\u064f\u062a\u0628 \u0628\u0648\u0627\u0633\u0637\u0629\" \/>\n\t<meta name=\"twitter:data1\" content=\"Steffan\" \/>\n\t<meta name=\"twitter:label2\" content=\"\u0648\u0642\u062a \u0627\u0644\u0642\u0631\u0627\u0621\u0629 \u0627\u0644\u0645\u064f\u0642\u062f\u0651\u0631\" \/>\n\t<meta name=\"twitter:data2\" content=\"14 \u062f\u0642\u064a\u0642\u0629\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/\"},\"author\":{\"name\":\"Steffan\",\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/#\\\/schema\\\/person\\\/d0dc4eac32e056ed7d040a8c486471ed\"},\"headline\":\"Solar Hanger Bolt Guide: Hanger Bolts for Steel and Wood Purlins\",\"datePublished\":\"2026-09-16T01:28:23+00:00\",\"dateModified\":\"2026-09-16T02:02:29+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/\"},\"wordCount\":2787,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/pv-mounts.com\\\/wp-content\\\/uploads\\\/2025\\\/02\\\/PVM-L-03-Adapter-Plate-with-solar-hanger-bolt-installated-effection-6.jpg\",\"articleSection\":[\"News\",\"Solar Mounting Accessories\"],\"inLanguage\":\"ar\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#respond\"]}]},{\"@type\":[\"WebPage\",\"FAQPage\"],\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/\",\"url\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/\",\"name\":\"Solar Hanger Bolt Guide: Hanger Bolts for Steel and Wood Purlins - PV MOUNTS\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/pv-mounts.com\\\/wp-content\\\/uploads\\\/2025\\\/02\\\/PVM-L-03-Adapter-Plate-with-solar-hanger-bolt-installated-effection-6.jpg\",\"datePublished\":\"2026-09-16T01:28:23+00:00\",\"dateModified\":\"2026-09-16T02:02:29+00:00\",\"description\":\"Solar hanger bolt selection guide for EPCs and installers. M10 SUS410 bolts for steel and wood purlins with 200, 250 and 300 mm lengths, EPDM pads and mounting options.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#breadcrumb\"},\"mainEntity\":[{\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521160974\"},{\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521211624\"},{\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521252317\"},{\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521284123\"},{\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521357325\"},{\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521379222\"},{\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521402864\"},{\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521437090\"},{\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521463517\"},{\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521489932\"},{\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521511851\"},{\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521537963\"},{\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521559204\"},{\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521614340\"}],\"inLanguage\":\"ar\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"ar\",\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#primaryimage\",\"url\":\"https:\\\/\\\/pv-mounts.com\\\/wp-content\\\/uploads\\\/2025\\\/02\\\/PVM-L-03-Adapter-Plate-with-solar-hanger-bolt-installated-effection-6.jpg\",\"contentUrl\":\"https:\\\/\\\/pv-mounts.com\\\/wp-content\\\/uploads\\\/2025\\\/02\\\/PVM-L-03-Adapter-Plate-with-solar-hanger-bolt-installated-effection-6.jpg\",\"width\":1000,\"height\":750,\"caption\":\"Pvm L 03 Adapter Plate With Solar Hanger Bolt Installated Effection (6)\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/pv-mounts.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Solar Hanger Bolt Guide: Hanger Bolts for Steel and Wood Purlins\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/#website\",\"url\":\"https:\\\/\\\/pv-mounts.com\\\/\",\"name\":\"PV MOUNTS\",\"description\":\"Reliable Solar PV Mounting System Racking Structure Manufacturer\",\"publisher\":{\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/pv-mounts.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"ar\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/#organization\",\"name\":\"PV MOUNTS\",\"url\":\"https:\\\/\\\/pv-mounts.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"ar\",\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/pv-mounts.com\\\/wp-content\\\/uploads\\\/2023\\\/05\\\/PV-Mount-Logo.png\",\"contentUrl\":\"https:\\\/\\\/pv-mounts.com\\\/wp-content\\\/uploads\\\/2023\\\/05\\\/PV-Mount-Logo.png\",\"width\":1377,\"height\":275,\"caption\":\"PV MOUNTS\"},\"image\":{\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/#\\\/schema\\\/person\\\/d0dc4eac32e056ed7d040a8c486471ed\",\"name\":\"Steffan\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"ar\",\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/wp-content\\\/uploads\\\/2025\\\/04\\\/PV-Mounts-Logo-4.29.svg\",\"url\":\"https:\\\/\\\/pv-mounts.com\\\/wp-content\\\/uploads\\\/2025\\\/04\\\/PV-Mounts-Logo-4.29.svg\",\"contentUrl\":\"https:\\\/\\\/pv-mounts.com\\\/wp-content\\\/uploads\\\/2025\\\/04\\\/PV-Mounts-Logo-4.29.svg\",\"caption\":\"Steffan\"},\"description\":\"XIAMEN PV Mounts Technology CO.,LTD is a positive and efficient high-tech solar bracket company committed to support the environment and renewable energy. info@pv-mounts.com\",\"sameAs\":[\"https:\\\/\\\/pv-mounts.com\"]},{\"@type\":\"Question\",\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521160974\",\"position\":1,\"url\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521160974\",\"name\":\"Q1: What is a solar hanger bolt?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Solar hanger bolt is a roof mounting fastener used to connect a rooftop solar mounting system to an underlying structural member such as a steel purlin or wood purlin.\",\"inLanguage\":\"ar\"},\"inLanguage\":\"ar\"},{\"@type\":\"Question\",\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521211624\",\"position\":2,\"url\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521211624\",\"name\":\"Q2: What size solar hanger bolts does PV Mounts supply?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"PV Mounts supplies <strong>M10 SUS410 solar hanger bolts<\\\/strong> in standard lengths of <strong>200 mm, 250 mm, and 300 mm<\\\/strong>.\",\"inLanguage\":\"ar\"},\"inLanguage\":\"ar\"},{\"@type\":\"Question\",\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521252317\",\"position\":3,\"url\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521252317\",\"name\":\"Q3: What is the difference between a self-tapping solar hanger bolt and a wood screw hanger bolt?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The structural fixing thread is different.<br>A <strong>self-tapping screw thread<\\\/strong> is used for suitable steel purlins, while a <strong>wood screw thread<\\\/strong> is used for suitable wood purlins or timber rafters.\",\"inLanguage\":\"ar\"},\"inLanguage\":\"ar\"},{\"@type\":\"Question\",\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521284123\",\"position\":4,\"url\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521284123\",\"name\":\"Q4: Can an M10 solar hanger bolt be used for both steel and wood purlins?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Not simply because it is M10. The structural fixing thread must match the supporting material.\",\"inLanguage\":\"ar\"},\"inLanguage\":\"ar\"},{\"@type\":\"Question\",\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521357325\",\"position\":5,\"url\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521357325\",\"name\":\"Q5: What does M10 \u00d7 250 mm mean?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"M10 identifies the metric thread size of the hanger bolt, while 250 mm refers to the nominal hanger bolt length.\",\"inLanguage\":\"ar\"},\"inLanguage\":\"ar\"},{\"@type\":\"Question\",\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521379222\",\"position\":6,\"url\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521379222\",\"name\":\"Q6: How do I choose between M10 \u00d7 200, 250, and 300 mm?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The required length depends on the roof covering, distance to the structural member, fixing requirements, mounting component thickness, and required exposed thread.\",\"inLanguage\":\"ar\"},\"inLanguage\":\"ar\"},{\"@type\":\"Question\",\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521402864\",\"position\":7,\"url\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521402864\",\"name\":\"Q7: What material is the hanger bolt made from?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The PV Mounts standard hanger bolt is made from <strong>SUS410 stainless steel<\\\/strong>.\",\"inLanguage\":\"ar\"},\"inLanguage\":\"ar\"},{\"@type\":\"Question\",\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521437090\",\"position\":8,\"url\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521437090\",\"name\":\"Q8: What is the function of the EPDM pad?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The EPDM pad provides a sealing interface around the roof penetration and helps reduce the risk of water ingress when correctly installed.\",\"inLanguage\":\"ar\"},\"inLanguage\":\"ar\"},{\"@type\":\"Question\",\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521463517\",\"position\":9,\"url\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521463517\",\"name\":\"Q9: Can the hanger bolt use an aluminum L-foot?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. The assembly can be supplied with an <strong>AL6005-T5 aluminum L-foot<\\\/strong>.\",\"inLanguage\":\"ar\"},\"inLanguage\":\"ar\"},{\"@type\":\"Question\",\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521489932\",\"position\":10,\"url\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521489932\",\"name\":\"Q10: Can the mounting plate be aluminum?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. The mounting plate can be supplied in <strong>AL6005-T5 aluminum<\\\/strong>.\",\"inLanguage\":\"ar\"},\"inLanguage\":\"ar\"},{\"@type\":\"Question\",\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521511851\",\"position\":11,\"url\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521511851\",\"name\":\"Q11: Can the mounting plate be SUS304 stainless steel?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. A <strong>SUS304 stainless steel plate<\\\/strong> is also available as an upper mounting option.\",\"inLanguage\":\"ar\"},\"inLanguage\":\"ar\"},{\"@type\":\"Question\",\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521537963\",\"position\":12,\"url\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521537963\",\"name\":\"Q12: Can the hanger bolt be supplied as a complete assembly?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. The assembly can include the M10 SUS410 hanger bolt, SUS304 flange nut, EPDM pad, and an AL6005-T5 aluminum L-foot, AL6005-T5 aluminum plate, or SUS304 stainless steel plate.\",\"inLanguage\":\"ar\"},\"inLanguage\":\"ar\"},{\"@type\":\"Question\",\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521559204\",\"position\":13,\"url\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521559204\",\"name\":\"Q13: What information should an EPC provide when requesting a quotation?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The buyer should provide the roof structure, fixing thread, required hanger bolt length, roof covering, upper mounting component, and solar rail requirements where applicable.\",\"inLanguage\":\"ar\"},\"inLanguage\":\"ar\"},{\"@type\":\"Question\",\"@id\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521614340\",\"position\":14,\"url\":\"https:\\\/\\\/pv-mounts.com\\\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\\\/#faq-question-1789521614340\",\"name\":\"Q14: Can PV Mounts supply OEM solar hanger bolts?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. OEM and project-specific configurations can be discussed based on the roof structure, dimensions, mounting interface, packaging, and project BOM.\",\"inLanguage\":\"ar\"},\"inLanguage\":\"ar\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Solar Hanger Bolt Guide: Hanger Bolts for Steel and Wood Purlins - PV MOUNTS","description":"Solar hanger bolt selection guide for EPCs and installers. M10 SUS410 bolts for steel and wood purlins with 200, 250 and 300 mm lengths, EPDM pads and mounting options.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/pv-mounts.com\/ar\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/","og_locale":"ar_AR","og_type":"article","og_title":"Solar Hanger Bolt Guide: Hanger Bolts for Steel and Wood Purlins - PV MOUNTS","og_description":"Solar hanger bolt selection guide for EPCs and installers. M10 SUS410 bolts for steel and wood purlins with 200, 250 and 300 mm lengths, EPDM pads and mounting options.","og_url":"https:\/\/pv-mounts.com\/ar\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/","og_site_name":"PV MOUNTS","article_published_time":"2026-09-16T01:28:23+00:00","article_modified_time":"2026-09-16T02:02:29+00:00","og_image":[{"width":1000,"height":750,"url":"https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/02\/PVM-L-03-Adapter-Plate-with-solar-hanger-bolt-installated-effection-6.jpg","type":"image\/jpeg"}],"author":"Steffan","twitter_card":"summary_large_image","twitter_misc":{"\u0643\u064f\u062a\u0628 \u0628\u0648\u0627\u0633\u0637\u0629":"Steffan","\u0648\u0642\u062a \u0627\u0644\u0642\u0631\u0627\u0621\u0629 \u0627\u0644\u0645\u064f\u0642\u062f\u0651\u0631":"14 \u062f\u0642\u064a\u0642\u0629"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#article","isPartOf":{"@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/"},"author":{"name":"Steffan","@id":"https:\/\/pv-mounts.com\/#\/schema\/person\/d0dc4eac32e056ed7d040a8c486471ed"},"headline":"Solar Hanger Bolt Guide: Hanger Bolts for Steel and Wood Purlins","datePublished":"2026-09-16T01:28:23+00:00","dateModified":"2026-09-16T02:02:29+00:00","mainEntityOfPage":{"@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/"},"wordCount":2787,"commentCount":0,"publisher":{"@id":"https:\/\/pv-mounts.com\/#organization"},"image":{"@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#primaryimage"},"thumbnailUrl":"https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/02\/PVM-L-03-Adapter-Plate-with-solar-hanger-bolt-installated-effection-6.jpg","articleSection":["News","Solar Mounting Accessories"],"inLanguage":"ar","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#respond"]}]},{"@type":["WebPage","FAQPage"],"@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/","url":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/","name":"Solar Hanger Bolt Guide: Hanger Bolts for Steel and Wood Purlins - PV MOUNTS","isPartOf":{"@id":"https:\/\/pv-mounts.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#primaryimage"},"image":{"@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#primaryimage"},"thumbnailUrl":"https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/02\/PVM-L-03-Adapter-Plate-with-solar-hanger-bolt-installated-effection-6.jpg","datePublished":"2026-09-16T01:28:23+00:00","dateModified":"2026-09-16T02:02:29+00:00","description":"Solar hanger bolt selection guide for EPCs and installers. M10 SUS410 bolts for steel and wood purlins with 200, 250 and 300 mm lengths, EPDM pads and mounting options.","breadcrumb":{"@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#breadcrumb"},"mainEntity":[{"@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521160974"},{"@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521211624"},{"@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521252317"},{"@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521284123"},{"@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521357325"},{"@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521379222"},{"@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521402864"},{"@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521437090"},{"@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521463517"},{"@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521489932"},{"@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521511851"},{"@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521537963"},{"@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521559204"},{"@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521614340"}],"inLanguage":"ar","potentialAction":[{"@type":"ReadAction","target":["https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/"]}]},{"@type":"ImageObject","inLanguage":"ar","@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#primaryimage","url":"https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/02\/PVM-L-03-Adapter-Plate-with-solar-hanger-bolt-installated-effection-6.jpg","contentUrl":"https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/02\/PVM-L-03-Adapter-Plate-with-solar-hanger-bolt-installated-effection-6.jpg","width":1000,"height":750,"caption":"Pvm L 03 Adapter Plate With Solar Hanger Bolt Installated Effection (6)"},{"@type":"BreadcrumbList","@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/pv-mounts.com\/"},{"@type":"ListItem","position":2,"name":"Solar Hanger Bolt Guide: Hanger Bolts for Steel and Wood Purlins"}]},{"@type":"WebSite","@id":"https:\/\/pv-mounts.com\/#website","url":"https:\/\/pv-mounts.com\/","name":"\u0645\u062b\u0628\u062a\u0627\u062a \u0643\u0647\u0631\u0648\u0636\u0648\u0626\u064a\u0629","description":"\u0627\u0644\u0634\u0631\u0643\u0629 \u0627\u0644\u0645\u0635\u0646\u0639\u0629 \u0644\u0647\u064a\u0643\u0644 \u0623\u0631\u0641\u0641 \u0646\u0638\u0627\u0645 \u062a\u0631\u0643\u064a\u0628 \u0627\u0644\u0637\u0627\u0642\u0629 \u0627\u0644\u0634\u0645\u0633\u064a\u0629 \u0627\u0644\u0643\u0647\u0631\u0648\u0636\u0648\u0626\u064a\u0629 \u0627\u0644\u0645\u0648\u062b\u0648\u0642 \u0628\u0647","publisher":{"@id":"https:\/\/pv-mounts.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/pv-mounts.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"ar"},{"@type":"Organization","@id":"https:\/\/pv-mounts.com\/#organization","name":"\u0645\u062b\u0628\u062a\u0627\u062a \u0643\u0647\u0631\u0648\u0636\u0648\u0626\u064a\u0629","url":"https:\/\/pv-mounts.com\/","logo":{"@type":"ImageObject","inLanguage":"ar","@id":"https:\/\/pv-mounts.com\/#\/schema\/logo\/image\/","url":"https:\/\/pv-mounts.com\/wp-content\/uploads\/2023\/05\/PV-Mount-Logo.png","contentUrl":"https:\/\/pv-mounts.com\/wp-content\/uploads\/2023\/05\/PV-Mount-Logo.png","width":1377,"height":275,"caption":"PV MOUNTS"},"image":{"@id":"https:\/\/pv-mounts.com\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/pv-mounts.com\/#\/schema\/person\/d0dc4eac32e056ed7d040a8c486471ed","name":"\u0633\u062a\u064a\u0641\u0627\u0646","image":{"@type":"ImageObject","inLanguage":"ar","@id":"https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/04\/PV-Mounts-Logo-4.29.svg","url":"https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/04\/PV-Mounts-Logo-4.29.svg","contentUrl":"https:\/\/pv-mounts.com\/wp-content\/uploads\/2025\/04\/PV-Mounts-Logo-4.29.svg","caption":"Steffan"},"description":"XIAMEN PV Mounts Technology CO.,LTD is a positive and efficient high-tech solar bracket company committed to support the environment and renewable energy. info@pv-mounts.com","sameAs":["https:\/\/pv-mounts.com"]},{"@type":"Question","@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521160974","position":1,"url":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521160974","name":"Q1: What is a solar hanger bolt?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"Solar hanger bolt is a roof mounting fastener used to connect a rooftop solar mounting system to an underlying structural member such as a steel purlin or wood purlin.","inLanguage":"ar"},"inLanguage":"ar"},{"@type":"Question","@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521211624","position":2,"url":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521211624","name":"Q2: What size solar hanger bolts does PV Mounts supply?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"PV Mounts supplies <strong>M10 SUS410 solar hanger bolts<\/strong> in standard lengths of <strong>200 mm, 250 mm, and 300 mm<\/strong>.","inLanguage":"ar"},"inLanguage":"ar"},{"@type":"Question","@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521252317","position":3,"url":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521252317","name":"Q3: What is the difference between a self-tapping solar hanger bolt and a wood screw hanger bolt?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"The structural fixing thread is different.<br>A <strong>self-tapping screw thread<\/strong> is used for suitable steel purlins, while a <strong>wood screw thread<\/strong> is used for suitable wood purlins or timber rafters.","inLanguage":"ar"},"inLanguage":"ar"},{"@type":"Question","@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521284123","position":4,"url":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521284123","name":"Q4: Can an M10 solar hanger bolt be used for both steel and wood purlins?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"Not simply because it is M10. The structural fixing thread must match the supporting material.","inLanguage":"ar"},"inLanguage":"ar"},{"@type":"Question","@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521357325","position":5,"url":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521357325","name":"Q5: What does M10 \u00d7 250 mm mean?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"M10 identifies the metric thread size of the hanger bolt, while 250 mm refers to the nominal hanger bolt length.","inLanguage":"ar"},"inLanguage":"ar"},{"@type":"Question","@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521379222","position":6,"url":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521379222","name":"Q6: How do I choose between M10 \u00d7 200, 250, and 300 mm?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"The required length depends on the roof covering, distance to the structural member, fixing requirements, mounting component thickness, and required exposed thread.","inLanguage":"ar"},"inLanguage":"ar"},{"@type":"Question","@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521402864","position":7,"url":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521402864","name":"Q7: What material is the hanger bolt made from?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"The PV Mounts standard hanger bolt is made from <strong>SUS410 stainless steel<\/strong>.","inLanguage":"ar"},"inLanguage":"ar"},{"@type":"Question","@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521437090","position":8,"url":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521437090","name":"Q8: What is the function of the EPDM pad?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"The EPDM pad provides a sealing interface around the roof penetration and helps reduce the risk of water ingress when correctly installed.","inLanguage":"ar"},"inLanguage":"ar"},{"@type":"Question","@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521463517","position":9,"url":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521463517","name":"Q9: Can the hanger bolt use an aluminum L-foot?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"Yes. The assembly can be supplied with an <strong>AL6005-T5 aluminum L-foot<\/strong>.","inLanguage":"ar"},"inLanguage":"ar"},{"@type":"Question","@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521489932","position":10,"url":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521489932","name":"Q10: Can the mounting plate be aluminum?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"Yes. The mounting plate can be supplied in <strong>AL6005-T5 aluminum<\/strong>.","inLanguage":"ar"},"inLanguage":"ar"},{"@type":"Question","@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521511851","position":11,"url":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521511851","name":"Q11: Can the mounting plate be SUS304 stainless steel?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"Yes. A <strong>SUS304 stainless steel plate<\/strong> is also available as an upper mounting option.","inLanguage":"ar"},"inLanguage":"ar"},{"@type":"Question","@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521537963","position":12,"url":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521537963","name":"Q12: Can the hanger bolt be supplied as a complete assembly?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"Yes. The assembly can include the M10 SUS410 hanger bolt, SUS304 flange nut, EPDM pad, and an AL6005-T5 aluminum L-foot, AL6005-T5 aluminum plate, or SUS304 stainless steel plate.","inLanguage":"ar"},"inLanguage":"ar"},{"@type":"Question","@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521559204","position":13,"url":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521559204","name":"Q13: What information should an EPC provide when requesting a quotation?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"The buyer should provide the roof structure, fixing thread, required hanger bolt length, roof covering, upper mounting component, and solar rail requirements where applicable.","inLanguage":"ar"},"inLanguage":"ar"},{"@type":"Question","@id":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521614340","position":14,"url":"https:\/\/pv-mounts.com\/solar-hanger-bolt-guide-hanger-bolts-for-steel-and-wood-purlins\/#faq-question-1789521614340","name":"Q14: Can PV Mounts supply OEM solar hanger bolts?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"Yes. OEM and project-specific configurations can be discussed based on the roof structure, dimensions, mounting interface, packaging, and project BOM.","inLanguage":"ar"},"inLanguage":"ar"}]}},"_links":{"self":[{"href":"https:\/\/pv-mounts.com\/ar\/wp-json\/wp\/v2\/posts\/17703","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/pv-mounts.com\/ar\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/pv-mounts.com\/ar\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/pv-mounts.com\/ar\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/pv-mounts.com\/ar\/wp-json\/wp\/v2\/comments?post=17703"}],"version-history":[{"count":6,"href":"https:\/\/pv-mounts.com\/ar\/wp-json\/wp\/v2\/posts\/17703\/revisions"}],"predecessor-version":[{"id":17713,"href":"https:\/\/pv-mounts.com\/ar\/wp-json\/wp\/v2\/posts\/17703\/revisions\/17713"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/pv-mounts.com\/ar\/wp-json\/wp\/v2\/media\/10392"}],"wp:attachment":[{"href":"https:\/\/pv-mounts.com\/ar\/wp-json\/wp\/v2\/media?parent=17703"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/pv-mounts.com\/ar\/wp-json\/wp\/v2\/categories?post=17703"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/pv-mounts.com\/ar\/wp-json\/wp\/v2\/tags?post=17703"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}