Not every roof tile can be matched with a standard solar roof hook.<\/p>\n\n\n\n
When a roof tile has an unusual profile, thickness, curvature, overlap, or fixing condition, a standard hook may not provide the required clearance or alignment. In these situations, a custom solar tile roof hook<\/strong> can be developed specifically for the actual roof tile and supporting structure.<\/p>\n\n\n\n For OEM and mounting-system manufacturers, customization does not necessarily mean redesigning the entire solar mounting system. If the existing system already uses a solar rail with a standard T-bolt and rail nut, the rail can often remain unchanged while the roof hook is redesigned around the tile and roof structure.<\/p>\n\n\n\n This guide focuses on how a custom solar tile roof hook is developed<\/strong>, what information is required, which dimensions can be modified, how an existing rail can be retained, and how the design moves from CAD and prototype to verification and mass production.<\/p>\n\n\n\n In most projects, a custom solar tile roof hook does not require a completely new mounting system. The hook geometry and fixing details are customized to match the roof tile and roof structure, while the existing rail, T-bolt, and rail nut interface can often remain standard.<\/p>\n\n\n\n A custom solar tile roof hook is developed by analyzing the actual roof tile profile, required clearance, roof structure, fixing position, load requirements, and existing rail connection.<\/p>\n\n\n\n The typical development process is:<\/p>\n\n\n\n Roof tile analysis \u2192 Hook geometry \u2192 Fixing design \u2192 CAD \u2192 Prototype \u2192 Fit verification \u2192 Mechanical verification \u2192 Approval \u2192 Mass production<\/strong><\/p>\n\n\n\n The roof tile is normally the main driver of the custom hook geometry.<\/p>\n\n\n\n The roof structure determines how the hook is fixed.<\/p>\n\n\n\n The project loads determine the required mechanical performance.<\/p>\n\n\n\n The existing solar rail, T-bolt, and rail nut define the connection interface when the customer wants to keep an existing mounting system.<\/p>\n\n\n\n This approach allows a manufacturer to develop a dedicated roof hook without necessarily changing the complete PV mounting architecture.<\/p>\n\n\n\n A standard solar roof hook has predefined dimensions and geometry. It is therefore designed around a particular range of roof conditions.<\/p>\n\n\n\n Actual roof tiles can vary considerably in:<\/p>\n\n\n\n A hook that fits one tile may not provide the same installation condition on another.<\/p>\n\n\n\n For example, a standard hook may:<\/p>\n\n\n\n The solution is not necessarily to replace the entire mounting system.<\/p>\n\n\n\n In many OEM applications, only the roof hook needs to be redesigned.<\/p>\n\n\n\n A solar roof hook becomes a custom component when its geometry or technical specifications are developed specifically for a customer’s roof tile, roof structure, or existing mounting-system interface.<\/p>\n\n\n\n The most commonly customized parameters are:<\/p>\n\n\n\n The purpose of customization is not simply to change dimensions.<\/p>\n\n\n\n A properly designed custom hook should provide:<\/p>\n\n\n\n Correct tile fit + suitable clearance + secure fixing + required mechanical performance + mounting-system compatibility.<\/strong><\/p>\n\n\n\n This is one of the most important considerations for OEM customers.<\/p>\n\n\n\n A customer may already have a complete mounting system, including:<\/p>\n\n\n\n The only missing component may be a suitable roof hook for a specific tile profile.<\/p>\n\n\n\n If the existing rail uses a standard T-bolt and rail nut connection, the custom roof hook can often retain the required connection interface.<\/p>\n\n\n\n The hook geometry is then adapted mainly to:<\/p>\n\n\n\n Roof tile + roof structure + clearance + fixing requirements.<\/strong><\/p>\n\n\n\n Therefore, a custom roof hook does not automatically require a new rail.<\/p>\n\n\n\n A customer already uses an aluminum solar rail with a standard T-bolt and rail nut.<\/p>\n\n\n\n The customer’s problem is that the existing standard roof hook does not fit a particular curved clay tile.<\/p>\n\n\n\n Instead of changing the rail, T-bolt, rail nut, and module clamps, the manufacturer can develop a new hook geometry that:<\/p>\n\n\n\n This is a typical OEM customization scenario.<\/p>\n\n\n\n Hook height affects the vertical relationship between the roof tile, hook, rail, and solar module.<\/p>\n\n\n\n It may need to be adjusted when:<\/p>\n\n\n\n The correct height should be determined from the actual installation condition rather than from the tile name alone.<\/p>\n\n\n\n The curvature of the hook can be adapted to the actual roof tile profile.<\/p>\n\n\n\n This is particularly relevant for:<\/p>\n\n\n\n The objective is stable contact without creating unnecessary interference or unsuitable loading on the tile.<\/p>\n\n\n\n The arm connects the tile-supporting area of the hook to the rail connection.<\/p>\n\n\n\n Its length or offset may need to change when the standard design cannot place the rail in the required position.<\/p>\n\n\n\n Possible reasons include:<\/p>\n\n\n\n The base plate connects the roof hook to the supporting roof structure.<\/p>\n\n\n\n Possible modifications include:<\/p>\n\n\n\n The base plate should be designed according to the actual fixing method and load path.<\/p>\n\n\n\n Material thickness can be modified according to the mechanical requirements of the custom design.<\/p>\n\n\n\n However, thickness should not be considered independently.<\/p>\n\n\n\n A thicker roof hook is not automatically a stronger roof hook.<\/p>\n<\/blockquote>\n\n\n\n Mechanical performance depends on the combination of:<\/p>\n\n\n\n The final thickness should therefore be selected as part of the complete design.<\/p>\n\n\n\n The rail connection is usually an interface requirement<\/strong>, rather than the main reason for customization.<\/p>\n\n\n\n If the customer’s existing rail uses a standard T-bolt and rail nut, the hook can often retain the required connection dimensions.<\/p>\n\n\n\n The manufacturer may need to confirm:<\/p>\n\n\n\n The complete rail profile may be useful for verification when the connection is proprietary, but it does not necessarily need to be redesigned.<\/p>\n\n\n\n The most important information is the actual roof condition.<\/p>\n\n\n\n Provide as much of the following as possible:<\/p>\n\n\n\n A physical tile sample is especially useful when the profile is difficult to describe using measurements alone.<\/p>\n\n\n\n The manufacturer may also need:<\/p>\n\n\n\n This information determines whether the proposed hook and base plate can transfer the required loads into the roof structure.<\/p>\n\n\n\n If an existing rail system must be retained, provide:<\/p>\n\n\n\n If the connection interface is standardized, the complete rail drawing may not always be necessary for the initial evaluation.<\/p>\n\n\n\n Before CAD development begins, the main engineering inputs can be summarized as follows:<\/p>\n\n\n\n Not all information must be available before the first engineering discussion.<\/p>\n\n\n\n A preliminary evaluation can often begin with roof tile photos, basic dimensions, fixing information, and the existing rail connection<\/strong>.<\/p>\n\n\n\n A professional development process normally includes the following stages.<\/p>\n\n\n\n The manufacturer first reviews the available roof tile, roof structure, existing mounting interface, and project requirements.<\/p>\n\n\n\n The key question is:<\/p>\n\n\n\n Can an existing roof hook be modified, or is a new geometry required?<\/strong><\/p>\n\n\n\n If a standard product can be modified without compromising the required performance, a modification may be more efficient than developing a completely new product.<\/p>\n\n\n\n The actual tile profile is analyzed to determine:<\/p>\n\n\n\n The hook should be designed around the actual installation condition.<\/p>\n\n\n\n The manufacturer creates a CAD model or engineering drawing.<\/p>\n\n\n\n Critical dimensions may include:<\/p>\n\n\n\n For OEM projects, the approved CAD drawing becomes an important reference for prototype approval and future production.<\/p>\n\n\n\n [Recommended future image: Real custom solar roof hook CAD drawing with confidential customer information removed.]<\/strong><\/p>\n\n\n\n A prototype is manufactured based on the approved preliminary drawing.<\/p>\n\n\n\n The prototype should ideally be checked against the actual roof tile.<\/p>\n\n\n\n Typical checks include:<\/p>\n\n\n\n [ This physical fitting step is particularly valuable for unusual tile profiles because measurements alone may not reveal every installation issue.<\/p>\n\n\n\n The prototype should be evaluated in the actual installation configuration whenever possible.<\/p>\n\n\n\n The verification should confirm:<\/p>\n\n\n\n Tile \u2192 Hook \u2192 Rail \u2192 Module<\/strong><\/p>\n\n\n\n and also:<\/p>\n\n\n\n Hook \u2192 Fastener \u2192 Roof Structure<\/strong><\/p>\n\n\n\n The objective is to identify interference, clearance, fixing, or installation problems before mass production.<\/p>\n\n\n\n Depending on project requirements, the custom hook may require mechanical verification such as:<\/p>\n\n\n\n The testing method should correspond to the actual hook geometry and expected loading conditions.<\/p>\n\n\n\n A test result from one hook geometry should not automatically be treated as proof for every custom roof hook design.<\/p>\n\n\n\n After prototype fitting and verification, the final design can be reviewed and approved.<\/p>\n\n\n\n Items normally confirmed include:<\/p>\n\n\n\n The approved drawing should become the controlled reference for production.<\/p>\n\n\n\n After final approval, the custom roof hook can enter mass production.<\/p>\n\n\n\n Production inspection may include:<\/p>\n\n\n\n For OEM customers, packaging and labeling can also be produced according to the customer’s requirements.<\/p>\n\n\n\n There is no single fixed price for a custom solar roof hook because the manufacturing cost depends on the design and production requirements.<\/p>\n\n\n\n Typical cost factors include:<\/p>\n\n\n\n Buyers should distinguish between:<\/p>\n\n\n\n Development\/prototype cost<\/strong><\/p>\n\n\n\n and<\/p>\n\n\n\n Mass-production unit cost.<\/strong><\/p>\n\n\n\n A simple modification to an existing hook may require less development work than a completely new geometry.<\/p>\n\n\n\n For accurate pricing, the manufacturer normally needs the basic roof tile information, material requirement, approximate design requirements, and estimated order quantity.<\/p>\n\n\n\n For customers with an existing PV mounting system, the key question is often whether the complete system needs to change.<\/p>\n\n\n\n In many cases, it does not.<\/p>\n\n\n\n This is why custom roof hook development can be an efficient solution for OEM mounting-system manufacturers.<\/p>\n\n\n\n The goal is to change only the component that needs to change while retaining compatible parts of the existing system.<\/p>\n\n\n\n SUS304 stainless steel is commonly used for solar roof hooks because it provides corrosion resistance and suitable mechanical properties for many rooftop PV applications.<\/p>\n\n\n\n It can be considered for:<\/p>\n\n\n\n However, material selection alone does not determine the final performance.<\/p>\n\n\n\n The complete engineering relationship is:<\/p>\n\n\n\n Material + thickness + geometry + fixing + connection + roof structure + applied loads<\/strong><\/p>\n\n\n\n For projects with specific environmental, structural, or compliance requirements, the material grade and mechanical requirements should be confirmed during engineering review.<\/p>\n\n\n\n Custom roof hooks are particularly useful for OEM and private-label mounting-system manufacturers.<\/p>\n\n\n\n A customer may already have its own mounting-system architecture but need a dedicated roof hook for a regional or proprietary tile.<\/p>\n\n\n\n The customer may already have:<\/p>\n\n\n\n The missing component is the roof hook.<\/p>\n\n\n\n In this situation, the manufacturer can focus development on the hook while retaining the existing mounting-system interface where technically appropriate.<\/p>\n\n\n\n OEM development may include:<\/p>\n\n\n\n This approach is suitable for solar mounting manufacturers, distributors, EPC contractors, importers, and private-label brands.<\/p>\n\n\n\n Before approving a custom solar roof hook, buyers should confirm:<\/p>\n\n\n\n Completing these checks before mass production helps reduce the risk of redesign, tooling changes, and installation problems.<\/p>\n\n\n\n For an initial custom roof hook evaluation, send:<\/p>\n\n\n\n If the tile is unusual, a physical sample is highly recommended.<\/p>\n\n\n\n The manufacturer can then determine whether:<\/p>\n\n\n\n The earlier the actual tile geometry is confirmed, the lower the risk of redesign during prototype development.<\/p>\n\n\n\n A custom solar tile roof hook is a mounting hook designed specifically for a particular roof tile profile, roof structure, or existing mounting-system requirement. Its geometry, dimensions, fixing arrangement, material thickness, or connection interface can be adapted to the project.<\/p> <\/div> Standard roof hooks have predefined geometry, while roof tiles vary in thickness, curvature, overlap, edge shape, and underside profile. A standard hook may therefore have insufficient clearance or incorrect contact and fixing positions on a non-standard tile.<\/p> <\/div> Yes, in many cases. If the existing rail uses a compatible T-bolt and rail nut connection, the custom roof hook can retain the required connection interface while its main geometry is adapted to the specific roof tile.<\/p> <\/div> Not necessarily. If the existing rail, T-bolt, rail nut, and module clamps meet the project requirements, the roof hook can often be customized without replacing the complete mounting system.<\/p> <\/div> Common customizable dimensions include hook height, curvature, arm length, offset, base plate dimensions, fixing-hole diameter, hole position, hole spacing, material thickness, and the required rail connection interface.<\/p> <\/div> Yes. Fixing-hole diameter, position, and spacing can be customized according to the supporting roof structure and fastener requirements. The final hole arrangement should be evaluated as part of the complete mechanical design.<\/p> <\/div> No. CAD is helpful but not always required for the initial evaluation. Roof tile photos, dimensions, an existing hook sample, or a physical tile sample can provide enough information to begin the design discussion.<\/p> <\/div> Yes. Prototype production is recommended when the tile profile is unusual or the hook is being developed for an OEM mounting system. A physical fitting check can identify clearance and fixing issues before mass production.<\/p> <\/div> Depending on the project requirements, verification may include static load, tensile\/pull, compression, bending, dimensional, or material inspection. The actual custom geometry should be evaluated according to its intended application.<\/p> <\/div> SUS304 is commonly used for solar roof hooks because of its corrosion resistance and suitable mechanical properties. Final material selection should be based on the project environment, structural requirements, and applicable specifications. SUS304 should not be selected only because it is stainless steel. The final material grade should be confirmed according to the installation environment, corrosion exposure, structural requirements, and applicable project specifications.<\/p> <\/div> Cost depends on material, thickness, geometry, manufacturing process, tooling, prototype quantity, testing, packaging, and order volume. The manufacturer normally needs basic tile and project information before providing an accurate quotation.<\/p> <\/div> Yes. OEM production can include custom geometry, CAD development, prototype production, specified materials, verification, mass production, packaging, and private labeling. Xiamen PVMOUNTS is a professional solar roof hook manufacturer providing custom SUS304 roof hook solutions for OEM and private-label mounting-system projects.<\/p> <\/div> The most useful information includes roof tile photos and dimensions, CAD drawings if available, the fixing method, existing roof hook samples, rail\/T-bolt\/rail-nut information, project loading requirements, and estimated order quantity.<\/p> <\/div> <\/div>\n\n\n\n Have a non-standard roof tile that does not fit an existing solar roof hook?<\/p>\n\n\n\n Send your:<\/p>\n\n\n\n The engineering team can evaluate whether an existing hook can be modified or whether a new custom solar tile roof hook<\/strong> should be developed.<\/p>\n\n\n\n For OEM projects, the custom hook can often be designed around your existing solar rail, T-bolt, and rail nut interface, allowing the rest of the mounting-system architecture to remain unchanged where technically appropriate.<\/p>\n\n\n\n From roof tile profile to CAD, prototype, verification, and mass production, a custom solar roof hook should be developed around the actual installation condition\u2014not simply selected from a standard product catalog.<\/strong><\/p>\n\n\n\n You do not need a complete CAD drawing to start. Roof tile photos, basic dimensions are often enough for an initial feasibility review.<\/p>\n\n\n\n This guide explains the design, development, and manufacturing process for custom solar tile roof hooks used in OEM and private-label PV mounting systems.<\/p>\n\n\n\n <\/p>\n","protected":false},"excerpt":{"rendered":" Not every roof tile can be matched with a standard solar roof hook. When a roof tile has an unusual profile, thickness, curvature, overlap, or fixing condition, a standard hook may not provide the required clearance or alignment. In these situations, a custom solar tile roof hook can be developed specifically for the actual roof […]<\/p>\n","protected":false},"author":1,"featured_media":14251,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1,155],"tags":[],"class_list":["post-17653","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-news","category-solar-roof-hooks"],"yoast_head":"\nQuick Answer: How Is a Custom Solar Tile Roof Hook Developed?<\/h2>\n\n\n\n
Why Does a Non-Standard Roof Tile Require a Custom Hook?<\/h1>\n\n\n\n
\n
\n
What Makes a Solar Roof Hook Custom?<\/h1>\n\n\n\n
Parameter<\/th> Why It May Need Customization<\/th><\/tr> Hook height<\/td> To match tile thickness and required clearance<\/td><\/tr> Hook curvature<\/td> To follow the actual tile profile<\/td><\/tr> Arm length<\/td> To position the rail correctly<\/td><\/tr> Offset<\/td> To avoid tile or structural interference<\/td><\/tr> Base plate<\/td> To suit the supporting structure<\/td><\/tr> Hole diameter<\/td> To match the specified fastener<\/td><\/tr> Hole position<\/td> To align with rafters, battens, or other supports<\/td><\/tr> Material thickness<\/td> To meet mechanical requirements<\/td><\/tr> Rail connection<\/td> To maintain compatibility with the existing mounting system<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n Can I Keep My Existing Solar Rail?<\/h1>\n\n\n\n
Yes, in many cases.<\/h2>\n\n\n\n
\n
Example<\/h3>\n\n\n\n
\n
Which Parts of a Solar Tile Roof Hook Can Be Customized?<\/h1>\n\n\n\n
1. Hook Height<\/h2>\n\n\n\n
\n
2. Hook Curvature<\/h2>\n\n\n\n
\n
3. Arm Length and Offset<\/h2>\n\n\n\n
\n
4. Base Plate<\/h2>\n\n\n\n
\n
5. Material Thickness<\/h2>\n\n\n\n
\n
\n
6. Rail Connection Interface<\/h2>\n\n\n\n
\n
What Information Is Needed to Design a Custom Roof Hook?<\/h1>\n\n\n\n
Roof Tile Information<\/h2>\n\n\n\n
\n
Roof Structure Information<\/h2>\n\n\n\n
\n
Existing Solar Mounting System<\/h2>\n\n\n\n
\n
Custom Roof Hook Design Inputs<\/h1>\n\n\n\n
Design Input<\/th> Main Purpose<\/th> Preferred Information<\/th><\/tr> Tile profile<\/td> Determines hook geometry<\/td> CAD, dimensions, photos or sample<\/td><\/tr> Tile thickness<\/td> Determines height and clearance<\/td> Actual measurement<\/td><\/tr> Tile curvature<\/td> Determines contact geometry<\/td> Profile measurement\/sample<\/td><\/tr> Tile overlap<\/td> Prevents interference<\/td> Actual overlap<\/td><\/tr> Roof structure<\/td> Determines fixing<\/td> Rafter\/batten information<\/td><\/tr> Fastener<\/td> Determines fixing holes<\/td> Bolt\/screw specification<\/td><\/tr> Existing rail<\/td> Defines connection interface<\/td> T-bolt and rail nut<\/td><\/tr> Roof pitch<\/td> Defines installation geometry<\/td> Roof angle<\/td><\/tr> Wind load<\/td> Defines design requirements<\/td> Project data<\/td><\/tr> Snow load<\/td> Defines design requirements<\/td> Project data<\/td><\/tr> Material<\/td> Defines material specification<\/td> SUS304 or specified grade<\/td><\/tr> Quantity<\/td> Supports production planning<\/td> Estimated order quantity<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n How Is a Custom Solar Roof Hook Designed?<\/h1>\n\n\n\n
Stage<\/th> Engineering Activity<\/th> Main Output<\/th><\/tr> 1<\/td> Requirement review<\/td> Preliminary design direction<\/td><\/tr> 2<\/td> Tile and roof analysis<\/td> Design parameters<\/td><\/tr> 3<\/td> CAD development<\/td> Engineering drawing\/model<\/td><\/tr> 4<\/td> Prototype production<\/td> Physical sample<\/td><\/tr> 5<\/td> Fit verification<\/td> Installation confirmation<\/td><\/tr> 6<\/td> Mechanical verification<\/td> Test\/inspection results<\/td><\/tr> 7<\/td> Customer approval<\/td> Approved drawing<\/td><\/tr> 8<\/td> Mass production<\/td> Production batch<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n Step 1: Requirement Review<\/h2>\n\n\n\n
Step 2: Roof Tile and Installation Analysis<\/h2>\n\n\n\n
\n
Step 3: CAD Development<\/h2>\n\n\n\n
\n
Step 4: Prototype Production<\/h2>\n\n\n\n
\n
Recommended future image: Custom roof hook prototype installed on the actual non-standard roof tile.]<\/s><\/strong><\/p>\n\n\n\nStep 5: Fit Verification<\/h2>\n\n\n\n
Step 6: Mechanical Verification<\/h2>\n\n\n\n
\n
[Recommended future evidence: Genuine mechanical test or inspection report\/photo.]<\/s><\/strong><\/p>\n\n\n\nStep 7: Customer Approval<\/h2>\n\n\n\n
\n
Step 8: Mass Production<\/h2>\n\n\n\n
\n
How Much Does a Custom Solar Roof Hook Cost?<\/h1>\n\n\n\n
Cost Factor<\/th> Potential Impact<\/th><\/tr> Material grade<\/td> Affects raw material cost<\/td><\/tr> Material thickness<\/td> Affects material consumption<\/td><\/tr> Hook geometry<\/td> Affects forming\/manufacturing<\/td><\/tr> Manufacturing process<\/td> Affects production cost<\/td><\/tr> Tooling<\/td> May be required for new geometry<\/td><\/tr> Prototype quantity<\/td> Affects development cost<\/td><\/tr> Testing<\/td> Depends on project requirements<\/td><\/tr> Packaging<\/td> Depends on OEM requirements<\/td><\/tr> Order quantity<\/td> Higher volume can reduce unit cost<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n Custom Solar Roof Hook vs. Modifying the Entire Mounting System<\/h1>\n\n\n\n
Existing Component<\/th> May It Need to Change?<\/th> Main Consideration<\/th><\/tr> Solar rail<\/td> Often no<\/td> Retain existing connection interface<\/td><\/tr> T-bolt<\/td> Often no<\/td> Confirm compatibility<\/td><\/tr> Rail nut<\/td> Often no<\/td> Confirm compatibility<\/td><\/tr> Mid clamp<\/td> Usually no<\/td> Existing module interface<\/td><\/tr> End clamp<\/td> Usually no<\/td> Existing module interface<\/td><\/tr> Roof hook<\/td> Yes, if standard hook does not fit<\/td> Main customization component<\/td><\/tr> Base fixing<\/td> May change<\/td> Depends on roof structure<\/td><\/tr> Hook geometry<\/td> Often yes<\/td> Adapt to tile profile<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n Why Is SUS304 Commonly Used for Custom Solar Roof Hooks?<\/h1>\n\n\n\n
\n
Custom Solar Roof Hooks for OEM Projects<\/h1>\n\n\n\n
\n
\n
What Should Buyers Check Before Mass Production?<\/h1>\n\n\n\n
Checkpoint<\/th> What to Verify<\/th><\/tr> Roof tile fit<\/td> Hook matches the actual tile<\/td><\/tr> Clearance<\/td> No unacceptable interference<\/td><\/tr> Fixing position<\/td> Aligns with the supporting structure<\/td><\/tr> Rail connection<\/td> T-bolt\/rail nut is compatible<\/td><\/tr> Material<\/td> Correct material grade<\/td><\/tr> Thickness<\/td> Matches approved design<\/td><\/tr> Mechanical performance<\/td> Actual design is appropriately verified<\/td><\/tr> Installation<\/td> Hook can be installed efficiently<\/td><\/tr> CAD drawing<\/td> Final dimensions are documented<\/td><\/tr> Inspection<\/td> Required inspection records are available<\/td><\/tr> Packaging<\/td> OEM requirements are confirmed<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n What Should You Send to a Solar Roof Hook Manufacturer?<\/h1>\n\n\n\n
\n
\n
Frequently Asked Questions<\/h1>\n\n\n\n
Request a Custom Solar Tile Roof Hook<\/h1>\n\n\n\n
\n
Send Your Roof Tile Profile<\/h3>\n\n\n\n