🔑 Key Features & Benefits

• 💧 100% Waterproof
  Non-penetrating design—clamps attach securely to roof seams with bolts. Integrated EPDM rubber ensures long-lasting waterproofing and roof protection.
• 🔧 Easy & Cost-Effective Installation
  Pre-assembled components with a rail extension system simplify setup. Install with just a hex key—no special tools or drilling required
• 🔄 Flexible Mounting Options
  Compatible with rail-based or direct panel mounting. Supports various roof types and solar module layouts for maximum versatility.
• 🧪 Lab-Tested Performance
  Proven structural strength and wind resistance through real-world testing on Klip-Lok roofing sheets.
• ✨ Customizable Design
  OEM & ODM support available. Custom sizes, colors, logos, and packaging to match your project needs.
• 🎯 High Installation Accuracy
  No on-site cutting—millimeter-level alignment is achieved through the unique rail extension method.
• 🌍 Built for All Conditions
  Compliant with AS/NZS 1170 standards. Reliable in extreme weather, including high wind and snow loads.
• 🛡 Long-Lasting Durability
  Backed by a 10-year warranty and up to 25 years of performance. Made from corrosion-resistant aluminum and stainless steel—fully recyclable.
•  

🔧 What You Need to Install Standing Seam Solar Clamps with Integrated Rails

Before you start, gather the necessary tools and components:

Required Materials:

• Standing seam clamps with integrated rails (also called rail-less solar clamps)

• Mid clamps and end clamps

• Torque wrench or impact driver with torque control

• Grounding accessories (if required)

• Safety gear (gloves, harness, helmet)

🛠️ Step-by-Step Installation Guide

✅ Step 1: Inspect the Standing Seam Metal Roof

Ensure the roof is compatible with standing seam solar clamps. Common seam types include:

• Snap-lock seam

• Mechanical lock seam

• Double-fold seam

Check for rust, seam deformation, or irregularities. A smooth, clean roof surface ensures proper clamping and long-term stability.

✅ Step 2: Plan and Mark the Solar Array Layout

• Use chalk lines or laser levels to mark rows and module positions.

• Follow the engineering layout based on your solar system design.

• Position clamps evenly to match the PV panel size and wind/snow load requirements.

✅ Step 3: Attach the Standing Seam Clamp with Integrated Rail

• Place the clamp directly over the standing seam.

• Tighten the stainless-steel set screws using a torque wrench, typically to 80–115 in-lbs (9–13 Nm).
  (Refer to the manufacturer’s specification for exact torque.)

• Ensure the clamp is aligned and doesn’t deform the seam during tightening.

🔒 Pro Tip: Many modern solar clamps include torque indicators or self-limiting bolts—great for fast, consistent installations.

✅ Step 4: Mount the Solar Panels

• Place the first panel on the integrated clamp rails.

• Use end clamps to fix the first module.

• Place the second panel, leaving proper spacing, and use mid clamps to secure it.

• Repeat across the row.

These rail-less solar clamps reduce hardware and simplify installation, saving time and labor costs.

✅ Step 5: Electrical Grounding & Bonding (if required)

• Use integrated bonding mid clamps or grounding lugs.

• Ensure all panels and clamps are properly bonded per NEC/IEC regulations.

• Check continuity across all modules.

✅ Step 6: Final System Check

• Recheck all torque settings.

• Verify module alignment and clamp spacing.

• Confirm secure electrical connections and cable management.

🎯 Benefits of Using Standing Seam Clamps with Integrated Rail

• ✅ No roof penetration = no leaks, no damage

• ✅ Faster installation = fewer parts, no long rails

• ✅ Lightweight solution = ideal for industrial and commercial metal roofs

• ✅ Aesthetically clean = lower profile and professional finish

• ✅ High compatibility = works with most standing seam metal roofs

One stop manufacturer specialized in solar mounting system and components for your solar mount projects.

PVMOUNTS has all kinds of solar mounting accessories designed for using on almost every roof and ground with excellent compatibility. Customized order is acceptable.

We can produce different solar panel mounted components including but not limited in:

• Rieles
• Ganchos
• Pies en L
• Tornillos de tierra
• Abrazaderas de costura
• Abrazadera central y final
• Toma de tierra
• Pinza de puesta a tierra
• Pinza de cable
• y más