🔑 Key Features & Benefits

• 💧 100% Waterproof
  Non-penetrating design—clamps attach securely to roof seams with bolts. Integrated EPDM rubber ensures long-lasting waterproofing and roof protection.
• 📐 Perfect Fit for Klip-Lok® 406
  Specially designed for Lysaght Klip-Lok 406 roofs, including Bluescope Steel panels, ensuring a precise and secure fit.
• 🔧 Easy & Cost-Effective Installation
  Pre-assembled components with a rail extension system simplify setup. Install with just a hex key—no special tools or drilling required
• 🔄 Flexible Mounting Options
  Compatible with rail-based or direct panel mounting. Supports various roof types and solar module layouts for maximum versatility.
• 🧪 Lab-Tested Performance
  Proven structural strength and wind resistance through real-world testing on Klip-Lok roofing sheets.
• ✨ Customizable Design
  OEM & ODM support available. Custom sizes, colors, logos, and packaging to match your project needs.
• 🎯 High Installation Accuracy
  No on-site cutting—millimeter-level alignment is achieved through the unique rail extension method.
• 🌍 Built for All Conditions
  Compliant with AS/NZS 1170 standards. Reliable in extreme weather, including high wind and snow loads.
• 🛡 Long-Lasting Durability
  Backed by a 10-year warranty and up to 25 years of performance. Made from corrosion-resistant aluminum and stainless steel—fully recyclable.
•  

🔧 How to Install a Solar Clamp on Klip-Lok® 406 Roof Panel

Installing a solar standing seam clamp on a Lysaght Klip-Lok® 406 roof is straightforward and non-penetrative, which protects the roof’s waterproof integrity. Here’s a step-by-step guide:

✅ Tools Required:

• Hex key (Allen wrench)

• Torque wrench (recommended)

• Standard hand tools

1. Align the Clamp

• Identify the Klip-Lok 406 seam (raised rib).

• Position the clamp directly over the seam.

• Make sure the clamp sits flush and straight on the seam for a secure fit.

2. Insert and Tighten Bolts

• Insert the set screws or bolts into the clamp.

• Using a hex key, tighten the bolts evenly to secure the clamp onto the seam.

• For best results, apply torque according to manufacturer recommendations (typically around 10–15 Nm, but verify with your clamp specs).

3. Verificação da estabilidade

• Gently shake the clamp to ensure it’s tightly fixed and doesn’t slide or move.

• If movement occurs, re-tighten bolts or inspect alignment.

4. Attach Mounting Rail or Direct Module

• Rail-Based Setup: Fix the solar mounting rail onto the clamp using the designated connection slot.

• Direct Mount Setup: Attach the solar panel directly using solar mid/end clamps if the clamp supports direct mounting.

5. Repeat & Proceed with Panel Mounting

• Repeat the process for each clamp along the seam.

• Once all clamps and rails (if applicable) are installed, mount the solar panels as per your system layout.

📝 Installation Tips:

• No drilling is needed—these clamps are designed to grip without penetrating the roof.

• Make sure to use EPDM or rubber-padded clamps for added waterproofing and protection.

• Always follow local codes and standards such as AS/NZS 1170 if applicable.

Would you like a visual diagram ou PDF installation guide with illustrations for Klip-Lok 406?

One stop manufacturer specialized in solar mounting system and components for your solar mount projects.

PVMOUNTS has all kinds of solar mounting accessories designed for using on almost every roof and ground with excellent compatibility. Customized order is acceptable.

We can produce different solar panel mounted components including but not limited in:

• Trilhos
• Ganchos
• L-Pé
• Parafusos de aterramento
• Grampos de costura em pé
• Grampo médio e grampo final
• Ficha de aterramento
• Clipe de aterramento
• Clipe de cabo
• e mais