🔑 Key Features & Benefits

• Widely Application: Compatible with all popular solar panels in the market. Corner and side mount are designated for virtually any aluminum framed solar panels.

• Drill free : 7 pcs mounts count be easily glued on with sikaflex 252

• Durable: 100% UV-resistant and recyclable ABS plastic mount

• Best suitable for flat roofs of aluminum, wood, or GRP material.

• Easier and more flexible installation.

🔧 How to Install Drill-Free ABS Solar Panel Mounting Kit for RVs, Boats & Flat Roofs

• 4 × ABS Corner Brackets

• 2 × ABS Side Brackets

• 1 × Double Cable Entry Gland (Black or White)

• Installation Manual (optional)

• Note: Sikaflex 252 or another compatible adhesive is required (not included).

🛠 Tools & Materials You’ll Need

• Sikaflex 252 adhesive (or equivalent UV/weather-resistant adhesive)

• Cleaning cloth or alcohol wipes

• Measuring tape or ruler

• Marker or pencil

• Optional: Masking tape and silicone sealant

📝 Installation Steps

1. Choose the Mounting Location

• Select a clean, flat surface on your RV roof, boat deck, camper, shed, or flat rooftop.

• Ensure there is enough space for both the solar panel and cable routing.

2. Clean the Surface

• Wipe down the mounting area using alcohol wipes or a clean cloth to remove dust, oil, or debris.

• Let the surface dry completely before proceeding.

3. Position the Brackets

• Place the 4 corner brackets at each corner of the solar panel frame.

• Align the 2 side brackets (if used) midway along the panel’s length for added stability.

• Use a pencil or marker to trace their positions.

4. Apply the Adhesive

• Apply a generous bead of Sikaflex 252 to the base of each bracket.

• Carefully press each bracket into place on the marked areas.

• Optional: Use masking tape to hold the brackets in place during curing.

5. Mount the Solar Panel

• Once the brackets are fixed, place the solar panel into the mount grooves.

• Most panels will self-secure within the bracket slots; check for a snug fit.

• Allow adhesive to fully cure for 24 hours before moving or traveling.

6. Install the Cable Entry Gland

• Choose a location close to the solar panel for routing cables inside.

• Mark and cut holes in the roof/deck if needed (only for cable routing).

• Insert cables into the double ABS cable entry gland, then seal it with the included waterproof grommets.

• Apply adhesive around the gland base and press firmly into place.

• Use silicone sealant around cable entry if extra waterproofing is needed.

✅ Installation Tips

• For best bonding strength, install in dry weather with temperatures above 10°C (50°F).

• Avoid drilling unless absolutely necessary—this system is designed for drill-free mounting.

• Routinely check the adhesive condition and cable gland tightness, especially after long trips.

One stop manufacturer specialized in solar mounting system and components for your solar mount projects.

PVMOUNTS has all kinds of solar mounting accessories designed for using on almost every roof and ground with excellent compatibility. Customized order is acceptable.

We can produce different solar panel mounted components including but not limited in:

• Рельсы
• Крючки
• L-Feet
• Винты заземления
• Зажимы для стоячих швов
• Mid Clamp & End Clamp
• Заземляющий наконечник
• Grounding Clip
• Solar FRP Walkway
• ABS bracket Mount kits for RVS
• Cable Clip
• и многое другое