Reliable Roof Solar Mounting Structure Manufacturer Since 2013

material,warranty and test

Popular Roof Mounting System

We have managed many roof mounting projects with our multiple and excellent solutions

MINI RAIL SYSTEM with solar panel rails PVM-MN-02

Mini Rail for Metal Roof

It’s a kind of simple, easy and efficiency installation for trapezoidal metal rooftops. Only need four compoents. Easy to transporation and installation

Adjustable Tilt System with Rails

Adjustable Tile for Metal Roof

Fixed or adjustable angles as 10-15°, 15-30° and 30-60° are for your option to maximize solar energy capacity

L feet Solar Mounting System for metal roof PVM-LF (7) solar pv racking

L feet System for Metal Roof

It can fix to the roof rafter directly, applied with screw or hanger bolts or fitted with designing roof standing seam clamps

Standing Seam Clamp Solar Mounting System Metdek 855 Dimondek 630 Interface PVM-TM(2)

Standing Seam Clamps

It’s used for direct mounting on corrugated or trapezoidal metal roof without penetration and damage

Tile Roof Hook Solar Mounting Bracket System

Tile Roof Mounting

Mainly for tile rooftops with a wide range of pitched roof hooks for various installation environments. 

Flat roof tripod mounting system with solar mount rails

Flat Roof Mounting

Fixed or adjustable angles as 10-15 deg, 15-30 deg and 30-60 degree are for your option to maximize energy production.

Popular Solar Mouting Accessories

General Rail

Mini Rail Kit

Mid Clamp

End Clamp

Rail Connector

L Feet with Self-taping Screw

L feet with Hanger Bolt

Tile Hook

Tile Hook

Tin Roof Hook

Standing Seam Clamp

Standing Seam Clamp

Adjustable Front Leg

Adjustable Rear Leg

Tripod Racking


Each manufacturing stage but also cater to the needs and concerns of installers and end users in the solar mounting solutions

Aluminum Raw Materials solar mount system components

Aluminum Raw Materials

Rail production pv mounts for solar racking system

Rail Production

Extrusion for solar mounting aluminum hardware


Aluminum Anodizing 1000x750

Aluminum Anodizing

hanger bolt inspection - PV Mounts

Quality Inspection

solar mounting system L feet pre-asslebly


solar mounting system - XIAMEN PV MOUNTS L feet brackt structure (9)


Loading and Delivery

Loading and Delivery

Solar Rail Test in SGS Lab

1. Compress Test

Load the compress force as a rate 5mm/min till damaged. Record the maximum force.

2. Chemical Composition Analysis

It is tested by the method of GB/T 7999-2015 for: Si, Fe, Cu, Mn, Mg, Cr, Zn, Ti, Al.

3. Dimensional Measurement

Take 5 samples into measurement with 3 time then get the average.

Projects of Solar Mounting System

Adjustable Tilt Mounting System with rails- Armenia

Adjustable Tilt in Armenia

Adjustable Tilt Mounting System - New Zealand

Adjustable Tilt in New Zealand

Flat Tile Hook Mounting System with rails

Tile Roof Hook in Slovak Republic

L Feet Mounting in Namibia


A: Please provided these details as posssible as you can. Thanks.

1The dimension of the solar panel:_________(Length*Width*Thickness)
2How many solar panels do you plan to install for the project?______pcs.
3Solar panel array layout.
If no available, please send size (Length and Width) of your installation site.
4What is the optial tilt angle for solar panel?: _______degree.
5What’s wind speed and snow load?___m/s anit-wind speed and____KN/m2 snow load.
6 What installation orientation for solar panel?_______(Horizontal or Vertical).
7Latitude and longitude of installation site? 
 For roof mounting system 
8Type of rooftop tin/flat/tile? or please send clear roof photo.
 For ground mounting system 
9Which foundation you need for your coming ground mounting system?  ______( ground screw/concrete/pile/pole )
10How tall is the lowest height from the solar panel to the ground?  _______mm

A: Yes. Free sample are available for checking quality at your express cost. Delivery cost will be refund after order confirmed.

A: It depends on your order quantity and requirement. Usually within 7~15 working days after received the deposit.

Quantity (pieces)1 – 500501 – 50005001 – 50000> 50000
Lead time (days)71015To be negotiated
Payment TermT/TSmall order100% T/T in advance
FOB30% T/T in advance, 70% balance paid before shipment.
CNF30% T/T in advance, balance paid against copy of B/L
Delivery MethodBy express, By air, By Sea or By train

A: We offer 10 years warranty and lifespin up to 25 years.

A. Yes of course.

We can offer installation page(links), videos steps by step. 

Yes, our roof mounting components are designed with versatility in mind. They are compatible with most solar panel models and roofing materials, making them ideal for a wide range of installations.

Our L-Feet are made from high-grade, corrosion-resistant aluminum, ensuring durability and strength. This makes them suitable for long-term outdoor use in various environmental conditions.

Absolutely. Our Components are engineered to endure extreme weather, including high winds and heavy snow loads, maintaining the integrity of your solar installations.

Certainly! We can tailor our mounting components to meet specific project requirements. Contact us with your project details, and our team will work closely with you to provide customized solutions.


How We Can Help


Fill out the form below, and we will be in touch shortly.