Caractéristiques principales :

• Montage sécurisé - Fileté aux deux extrémités, un côté s'ancre dans la poutre de toit, tandis que l'autre se connecte aux supports de montage tels que les pieds en L ou la plaque de montage.
• Waterproof Protection – The flashing plate prevents water intrusion, safeguarding the roof from leaks and ensuring long-term durability.
• Versatile & Adjustable – Designed to work with various solar mounting systems, including pitched roof setups. The L-foot design allows for flexible height adjustments.
• Résistant à la corrosion et très durable – Made from high-grade aluminum AL6005-T5 and stainless steel SUS 304, offering corrosion resistance and excellent load-bearing capacity.
• Installation facile et rapide – The pre-drilled holes and pre-assembled components included lag bolts allow for a quick and secure installation, reducing labor costs and installation time.

En tant que fabricant avec plus de 10 ans d'expérience dans le domaine des accessoires de montage pour rayonnages solaires, nous nous engageons à fournir un service de qualité à nos clients. des produits de la meilleure qualité et un service exceptionnel à nos clients.

Optimize your solar projects today with our high-performance L foot with asphalt shingle flashing! Contact us for bulk orders or customization options.

Bom List

Installing L Foot with Asphalt Shingle Flashing is essential for a secure and waterproof solar panel mounting system on asphalt shingle roofs. Follow this step-by-step guide to ensure a leak-proof, durable, and efficient installation.

🛠 Outils et matériel nécessaires :

✔ L Foot with Asphalt Shingle Flashing Kit (includes L-foot, flashing plate, lag bolt, EPDM sealing washer)
✔ Drill with appropriate drill bits
✔ Socket wrench
Ruban à mesurer et marqueur
✔ Caulking sealant (optional for extra waterproofing)
✔ Solar mounting rails & hardware

🔧 Guide d'installation pas à pas

Step 1: Locate Roof Rafters

• Use a stud finder or tap method to find the roof rafters beneath the asphalt shingles.
• Mark the spots where the L feet will be installed, ensuring even spacing for proper weight distribution.

Étape 2 : Perçage des trous pilotes

• Carefully lift the shingles at the marked locations.
• Use a drill bit slightly smaller than the lag bolt to create pilot holes in the rafters.

Step 3: Install Flashing Plate

• Slide the flashing plate under the shingle to maintain a waterproof seal.
• Ensure that the pre-drilled hole in the flashing aligns with the pilot hole in the roof.

Step 4: Attach the L Foot

• Position the L foot over the flashing plate.
• Insert the lag bolt through the L foot and flashing into the rafter.
• Tighten it securely using a socket wrench, ensuring a firm and stable connection.

Step 5: Apply Additional Waterproofing (Optional)

• Use roofing sealant or caulking around the lag bolt to enhance water resistance.

Step 6: Attach the Mounting Rails

• Secure the solar mounting rails to the L-foot using the provided bolts and nuts.
• Check for proper alignment and leveling before proceeding.

Step 7: Secure the Solar Panels

• Monter les panneaux solaires sur les rails à l'aide de pinces intermédiaires et de pinces d'extrémité.
• Tighten all fasteners securely for a stable installation.

✅ Conseils d'installation :

✔ Always ensure proper alignment and even spacing for load distribution.
✔ Do not overtighten the lag bolt—tighten just enough for a secure hold.
✔ Double-check waterproofing to prevent roof leaks.
✔ Follow local building codes and manufacturer guidelines for best results.

📌 Why Use L Foot with Asphalt Shingle Flashing?

✔ Leak-Proof Protection – Prevents water intrusion and roof damage.
✔ Durable & Corrosion-Resistant – Made from AL6005-T5 aluminum & SUS 304 stainless steel.
✔ Strong & Secure – Provides a stable mounting base for solar panels.
✔ Easy Installation – Designed for quick setup with minimal labor.

Need High-Quality Solar Mounting Solutions?

📞 Contact us today for bulk orders, custom designs, and expert installation support! 🚀

PV Mounts est un fabricant de systèmes de montage solaire à guichet unique. Nous pouvons produire différents composants montés sur des panneaux solaires, notamment :

• Rails
• Crochets
• L-Feet
• Vis de terre
• Pinces pour joints debout
• Collier de serrage central et collier de serrage d'extrémité
• Cosse de mise à la terre
• Clip de mise à la terre
• Clip de câble
• et plus