Kulcsfontosságú jellemzők:

• Secure Mounting – Threaded on both ends, one side anchors into the roof beam, while the other connects to mounting brackets such as L-feet or mounting plate.
• Superior Weatherproofing – Equipped with an EPDM rubber washer to create a leak-proof seal when compressed against the roof sheet, ensuring long-term protection against water penetration.
• Állítható kialakítás – Available in multiple lengths (150mm-300mm) with a double-threaded ends allow for easy & precise depth and height adjustments to suit different roofing structures during installation.
• Versatile Applications – Compatible with both wooden and steel beams. Available in pointed head for wooden rafters and flat head for steel purlins, making it adaptable to various roof structures.
• Corrosion-Resistant & Highly Durable – Made from SUS 304 stainless steel to withstand various environmental conditions, , these bolts feature a highly corrosion-resistant surface treatment, ensuring firmness and lonevity even in extreme environments.
• Easy & Fast Installation – Pre-assembled components allow for quick mounting and direct fixed onto steel purlins, reducing labor time and installation complexity.

As a manufacturer with over 10 years of experience in solar racking mounting accessories, we are committed to delivering the best quality products and exceptional service to our customers.

Upgrade your solar installations with PVMOUNTS Stainless Steel Hanger Bolts for Metal Roofs—built for strength, stability, and long-term performance.

Contact us today for bulk orders and customized solutions!

How to Install a Solar Hanger Bolt for Metal Roof Solar Mounting

Installing a solar hanger bolt is a crucial step in securing a solar panel racking system on metal roofs. Follow these steps for a proper and secure installation:

Tools & Materials Needed:

• Solar hanger bolts (pointed head for wooden rafters or flat head for steel purlins)
• L-feet or mounting plate
• Flange nuts & EPDM washer
• Power drill & drill bit (suitable for metal or wood)
• Wrench or socket tool
• Measuring tape & marker

Lépésről lépésre telepítési útmutató:

Step 1: Mark the Drilling Points

• Identify the positions where the hanger bolts will be installed.
• Ensure alignment with the solar panel racking layout.
• Mark the spots using a marker or chalk for precision.

Step 2: Drill Pilot Holes

• For wooden rafters: Use an appropriately sized drill bit to create a pilot hole at the marked spot.
• For steel purlins: Pre-drill the hole based on the bolt diameter for easier insertion.

Step 3: Insert the Hanger Bolt

• Insert the solar hanger bolt into the drilled hole.
• Tighten it using a wrench or power tool until it is firmly secured into the roof structure.

Step 4: Secure the EPDM Washer & Flange Nut

• Slide the EPDM washer onto the hanger bolt to create a weatherproof seal against water leaks.
• Attach and tighten the flange nut over the washer to secure the bolt.

Step 5: Attach L-Foot or Mounting Plate

• Mount the L-foot or plate onto the exposed threaded end of the hanger bolt.
• Adjust the height if necessary to align with the racking system.
• Secure it tightly with a flange nut.

Step 6: Verify Stability & Waterproofing

• Ensure all bolts are properly tightened and secure.
• Check that the EPDM washer is compressed to maintain a leak-proof seal.
• Proceed with installing the solar rails and modules.

A PV Mounts egyablakos gyártó a napelemes rögzítő rendszerek számára. Különböző napelemes szerelt alkatrészeket tudunk gyártani, többek között:

• Rails
• Hooks
• L-Feet
• Földelt csavarok
• Álló varrás bilincsek
• Mid Clamp & End Clamp
• Földelő cső
• Grounding Clip
• Cable Clip
• és így tovább